Specifications - Lexicon I-ONIX U22 Owner's Manual

Specifications

Microphone Inputs:
Input Impedance:
Phantom Power:
Maximum gain:
E.I.N. (at max gain):
Maximum Input Level:
Frequency Response:
THD+N:
Line Inputs:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Instrument Input:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Line Outputs:
Level:
Impedance:
Headphone Output:
MIDI Interface:
Sample Rate:
Dynamic Range:
Power Requirements:
Lexicon
20
therefore subject to change without notice.
® engineers are constantly working to improve the quality of our products. Specifications are
Female XLR Pin 2 Hot
3kΩ balanced
+48 Volts
+58 dB
−125 dBu @ 58dB gain typical (150Ω source)
−129 dBu @ 58dB gain typical A-weighted (150Ω source)
+21 dBu at minimum gain
+0/−1 dB, 20Hz - 20kHz
<0.006%, 20Hz - 20kHz (mic input to main output) 0 dBu input level
<0.003%, 1kHz, +5 dBu input level
1/4" TRS balanced or unbalanced
20kΩ balanced, 13kΩ unbalanced
+32 dBu
+0/−1.5 dB, 20Hz - 20kHz (reference 1kHz)
<0.004%, 20Hz - 20kHz (line input to main output) 0 dBu input level
1/4" TS unbalanced
1MΩ
+13 dBu
+0/−2 dB, 20Hz - 20kHz (instrument input to main output)
<0.004%, 20Hz - 20kHz, 0 dBu input level
1/4" TRS balanced or unbalanced
>+18 dBu maximum
32Ω Balanced, 16Ω Unbalanced
1/4" stereo jack 350mW per channel at 50Ω
5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
44.1, 48, 88.2, or 96 kHz (determined by computer application)
A/D (24 Bit) 105 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 107 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz
Japan: 100 VAC, 50/60 Hz
Europe: 230 VAC, 50 Hz
UK: 240 VAC, 50 Hz
Australia: 240 VAC, 50 Hz
Adapter: PS0913B - 120
Adapter: PS0913B - 100
Adapter: PS0913B - 230
Adapter: PS0913B - 240
Adapter: PS0913B - 240-AU