Start Recording; Listen To The Recording - Lexicon I-ONIX U22 Owner's Manual

Start Recording

Record button on Cubase
1. Click the
Record Button
2. Play the guitar.
3. When you are finished recording press the
Stop Button

Listen to the Recording

1. In Cubase, click the Go to Zero button.
Go to Zero Button
2. Turn the Phones knob all the way down.
3. Put on the headphones.
4. In Cubase, click the Play button.
Play Button
5. On the U22, gradually turn up the
fortable listening level.
Once you add a track to your Cubase project the Input Routing field will
default to U22 In 1. However if you connect instruments to other inputs
on the U22 you will need to change the input routing for the track you are
recording onto. Please refer to the chart below to see how the input routing
labels in Cubase LE 4 correspond to the physical inputs on the U22.
U22 Input
1
2
® LE 4's Transport control.
Stop button.
Phones knob until you reach a com-
Input Routing Labels for Mono
Tracks in Cubase LE 4 (When
using the Lexicon ® I•ONIX U22
Mono In Project Template)
U22 In 1
U22 In 2
17