Start Recording; Listen To The Recording - Lexicon I-ONIX U82S Owner's Manual

18

Start Recording

Record button on Cubase
1. Click the
Record Button
2. Play the guitar.
3. When you are finished recording press the
Stop Button

Listen to the Recording

1. In Cubase, click the Go to Zero button.
Go to Zero Button
2. Turn the Phones 1 knob all the way down.
3. Put on the headphones.
4. In Cubase, click the Play button.
Play Button
5. On the U82S, gradually turn up the
comfortable listening level.
Once you add a track to your Cubase project the Input Routing field will
default to U82S In 1. However if you connect instruments to other inputs
on the U82S you will need to change the input routing for the track you are
recording onto. Please refer to the chart below to see how the input routing
labels in Cubase LE 4 correspond to the physical inputs on the U82S.
U82S Input
1
2
3
4
5
6
7
8
® LE 4's Transport control.
Stop button.
Phones 1 knob until you reach a
Input Routing Labels for Mono
Tracks in Cubase LE 4 (When
using the Lexicon ® I•ONIX U82S
Mono In Project Template)
U82S In 1
U82S In 2
U82S In 3
U82S In 4
U82S In 5
U82S In 6
U82S In 7
U82S In 8