Start Recording; Listen To The Recording - Lexicon I-O|42 Owner's Manual

Start Recording

1. Click the Record button on Cubase
Record Button
2. Play the guitar.
3. When you are finished recording press the Stop button.
Stop Button

Listen to the Recording

1. In Cubase, click the Go to Zero button.
Go to Zero Button
2. Turn the Phones 1 knob all the way down.
3. Put on the headphones.
4. In Cubase, click the Play button.
Play Button
5. On the IO 42, gradually turn up the Phones 1 knob until you reach a
comfortable listening level.
Once you add a track to your Cubase project the Input Routing field will
default to IO 42 In 1. However if you connect instruments to other inputs
on the IO 42 you will need to change the input routing for the track you are
recording onto. Please refer to the chart below to see how the input routing
labels in Cubase LE correspond to the physical inputs on the IO 42.
IO 42 Input
1
2
3
4
® LE's Transport control.
Input Routing Labels for Mono
Tracks in Cubase LE (When using
the Lexicon IO 42 Mono In
®
Project Template)
IO 42 In 1
IO 42 In 2
IO 42 In 3
IO 42 In 4
19