Yaesu FTM-10R Brochure & Specs page 3

•
Hands-free operation is possible, using the
wireless Bluetooth¤ option, and a headset.
Hands-free operation
with VOX function
Options
BH-1 CAB-1
®
Bluetooth headset Headset charger
(Waterproof equivalent sleeve for the BH-1
®
to IP55 standard) Bluetooth headset
®
(The optional BU-1 Bluetooth unit can be installed either in the
control panel unit or in the main body)
HEAVY DUTY YET EASY TO OPERATE
•
A minimum number of key buttons on the front
control panel, for safer operation during motor
sports activities. The large multi-functional dial
and durable keys are easy to operate even when
wearing gloves.
•
Enjoy your FTM-10/E* outdoor with your motorcycle,
SUV or RV anywhere! The commercial grade
front panel meets the IP57 standard. (Waterproof
at 3 feet (1 m) for 30 minutes, and protection
against dust.) All connectors are waterproof.
* Photo is Using Optional MEK-M10
Note: The FTM-10R/E* chassis section is not a waterproof enclosure.
FOR YOUR OUTDOOR
MOTOR SPORTS ACTIVITIES
•
Equipped with a high power 8-watt audio amplifier.
Use the PA function with the optional, commercial
grade MLS-200-M10 speaker.
•
With the intercom feature, you can communicate
with a fellow passenger. Hands-free intercom
operation is available with the optional Bluetooth
function.
•
AF Dual Monitor Function: Listen to your favorite
AM or FM stereo broadcast station, and monitor
an amateur band at the same time! External audio
input is also available to connect your iPod
NB: AF Dual Monitor Function does not permit monitoring two
different amateur bands at the same time.
BU-1
Bluetooth ®
adapter unit
•
The main body of the FTM-10R/E* is a solid die-cast aluminum sandwich structure. The high quality
die-cast aluminum chassis doubles as the heat sink providing more than enough air-cooled ventilation
for the power modules. The sandwich structure also provides far better resistance to vibration and
shock than many conventional transceivers and radios.
•
The design shields against ignition noise and alternator whine for mobile operation!
•
The Smart Key feature:
The "F" key on the control panel accesses the
most frequently used functions.
"Up" / "Down" Select a function
Receive an AM, or
FM stereo, broadcast
station and monitor
an amateur band at
the same time
DIMMER
DIMMER Adjust brightness of the display
INTERCOM Turn Intercom function On/Off
MONI Disables the noise squelch, allowing you to hear
weak signals.
PA Enables/Disables the PA function. Press PTT to activate.
SCAN Scan frequencies or memory channels.
SQL LEVEL
Adjust the squelch threshold level.
SSCH
Activate Smart Search function
TX POWER
Select the transmitter power level
VOL.ITCOM
Adjust the intercom audio level.
•
AF Pre-Set Function
The audio volume bar appears on the LCD
screen and shows an orange warning if the
volume is below a Pre-
set level, preventing you
from missing lower volume
audio stations.
COMMUNICATE WITH YOUR FRIENDS ON THE ROAD!
LOADED WITH MANY HANDY FUNCTIONS
FOR USE DURING ALL-WEATHER OUTDOOR
MOTOR SPORTS ACTIVITIES
•
The Club Channel Monitor function permits
your group to always monitor the designated
user-defined frequency.
•
The message function can transmit alphanumeric
®
messages (up to 20 messages/16 characters
maximum) with a sender's ID. In an emergency
the message can be communicated even in a
noisy outdoor environments.
®
!
•
Wireless cloning allows transfer of memory
information without any cable.
Note: The Wireless cloning function can only be performed by
and between the FTM-10R/E transceivers. Other transceivers
and radios are not supported.
"F" Execute/Accept
•
Includes an event timer stopwatch with an interval
function to support many outdoor motor sports activities.
OTHER USEFUL FEATURES
•
Tone control
•
operation.
Control can adjust the speaker volume relative to
a nearby noisy environment.
brightness control.
are available: 50W (70 cm : 40W) / 20W /5W
•
The VOX function includes automatic audio
delay on transmit to ensure transmission of the
start of your message.
function can end a continuous transmission after
a preset time.
can be used to access the Vertex Standard
™
WiRES-II
•
DC input voltage display
feature that will scan and load frequencies
automatically where activity is found.
ARTS™ (Automatic Range Transponder System)
feature which provides audio and/or visual
confirmation that another ARTS™ equipped
station is within communication range.
•
Band Up/Down key for easy
•
Simple key locking. Automatic Volume
•
Dimmer — Display
•
Three transmit power levels
•
The Time-Out Timer (TOT)
•
The Internet Connection Feature
•
system. Various scanning features.
•
The Smart Search
•
*E for European Version
The