Yaesu FTM-10R Brochure & Specs page 2

Newly Designed Mobile Transceiver with Waterproof/Dustproof
Front Operation Panel to Support All-Weather Outdoor Activity.
The die-cast chassis section is not a waterproof structure (FTM10R/E*).
HIGH QUALITY, WELL BUILT, RUGGED
DUAL BAND FM TRANSCEIVER
•
The high power RF
output of the FTM-10R/E*
is produced by the heavy
duty, high efficiency, RF
POWER MOS FET
amplifier. Powerful and
reliable 2 m / 70 cm Band
operation is guaranteed.
•
The FTM-10R/E* has a completely independent
AM/FM broadcast radio receiver, in addition to
the amateur band receiver. You will enjoy
broadcast band receiver coverage, and high
quality operation on the 2 m / 70 cm bands at
the same time.
•
Band Group Memory System
The versatile memory system uses up to 500
memory channels. Each memory channel can be
labeled with an 8-digit alphanumeric tag. The
memory channels may
be recalled by a specific
operating band, if desired.
•
The FTM-10R/E* has a large 2 inch/50 mm
1.5W speaker in the die-cast chassis and is
equipped with a high power 8-watt audio
amplifier, and a PA function for outdoor operation
with the optional MLS-200-M10 speaker(s). A
high quality 1.1 inch/28
1.1 inch/28 mm
mm speaker is built into
speaker
the detachable front
panel; you can operate it
like an HT!
COMPLETE NEW STYLING
EASY-TO-OPERATE PACKAGE!
•
Great new appearance! The keys and indicators
are illuminated with very bright LEDs. The bright
ocean blue negative type LCD display is easy on
your eyes.
•
Super compact detachable front panel is ready
to go with your motor vehicle!
•
The microphone and PTT button are built into
the front panel. Detach the front panel with one-
touch release when transmitting! The detachable
front panel may be separated from the main
chassis, and attached to a flat metal surface with
,
the magnetic mounting bracket.
•
Hanger Bracket
(* Meets the IP57 standard. Waterproof at 3 ft (1 m) for
30 minutes and protection against dust)
The detachable Control Panel is shown here mounted on a motorcycle
handlebar using the optional MMB-M11 multi-angle bracket.
NB:
1) Use of a communication device with a display while driving
may be prohibited in some states and some Countries.
2) Optional microphones and the external microphone jack
MEK-M10 are also available.
•
The simple hanger type
bracket may be attached
to the top or bottom. The
front panel may be tilted
up or down 20 degrees
with an adaptor bracket. The basic installation kit
is included. (With the adapter bracket, 10 ft / 3 m
separation control cable, magnetic mount, and
the one-touch release hanger bracket.)
20°
20°
•
The optional, moisture and dust protected MLS-
200-M10 external loudspeaker is available for
use in a noisy outdoor environment.