Related Manuals for CARLO GAVAZZI UDM 40 Series
Summarization of Contents
UDM 35/40 Programming Fundamentals
Access to Programming Mode
Explains how to enter programming mode and the password system.
Input Module Configuration
Configuration for input modules, probe selection, and signal ranges.
Temperature Compensation
Configuration for Cold Junction Compensation (CJC) for thermocouple inputs.
Display Configuration
Settings for display resolution (UDM35) and alarm colors (UDM40).
Input Scaling and Decimal Point
Configuring electrical input range and decimal point position.
Display Span Configuration
Defining minimum and maximum displayed values.
Signal Linearization
Programming non-linear signal inputs for specific modules.
Alarm Set Point Configuration
Configuring set points, hysteresis, delays, and relay behavior.
Digital Filtering
Applying digital filters to stabilize displayed values.
Analog Output Programming
Configuring analog output retransmission of display values.
Serial Port Output
Configuring serial port address and baud rate for communication.
Temperature Scale Conversion
Guidelines for converting temperature scale displays.
External Command Function
Assigning command signals from input terminals.
UDMSoft Programming
Instructions for using UDMSoft software for programming.
Need help?
Do you have a question about the UDM 40 Series and is the answer not in the manual?
Questions and answers