INTRODUCTION
851-165215 / Rev.A
Purpose
The purpose of this installation manual is the provide the basic
information required to install the 38/200 Combi D echo
sounder transducer.
Note that although drawings are provided to explain the
installation principles, the installation shipyard must provide the
final drawings required to fit each individual vessel. Also, when
applicable, the installation shipyard must have the drawings and
installation approved by the proper authorities.
Transducer order no: KSV-203004
A cable gland kit for steel hulls is included with the delivery.
Other cable glands must be ordered separately.
Transducer installation
The next chapter in this manual provides generic guidelines for
transducer installation. The drawings specific for the 38/200
Combi D transducer are located in the Drawing file.
Technical specifications
Refer to the 38/200 Combi D product specification, Simrad
document number 855-164210.
Installation manual
1