Simrad 38/200 Combi D Transducer
INSTALLATION
2
This chapter provides general installation guidelines for
transducer installation. The following topics are described:
• Transducer location
• Mounting (different methods are shown when applicable)
• Cable glands
• Steel conduit for transducer cable
• Handling and maintenance
• Approved anti-fouling paints
The information in this chapter must be regarded as general
guidelines and recommendations only. The installation shipyard
must design and manufacture installation hardware to fit each
individual vessel.
Whenever required, the installation shipyard must also have the
installation approved by the applicable maritime authorities.
851-165215 / Rev.A