Using The Fixing Belts (Accessories) - CONCORD LIFT CORE Manual

Pull the belt taut so that the lap belt and diagonal belt are well positioned
and ensure that the belts are not twisted. The lap belt should be in the lowest
possible position. If your vehicle is fitted with a seat belt height adjuster,
adjust its height accordingly.
When you wish to remove the child from the seat, all you need to do is open
the buckle and pass the strap back across the child. To remove the
shoulder belt from the slot, press down the securing hook (C1) and pull the
belt forwards (Figure 3).
It is nonetheless important to ensure that the straps are always correctly
positioned each time the seat is used. Figure 1 illustrates the correct method
of installation. Figures 4 and 5 show incorrect variations. If you have any
doubts about installation, please contact us to check. The belts must pass
through the belt guides marked in red on the seat and shown in Figures 1
and 2. Belts must not be routed in any other way.

_ USING THE FIXING BELTS (ACCESSORIES)

We have developed fixing belts as special accessories for the CONCORD
LIFT CORE backrest. These belts assist in positioning the child car seat. Any
drawbacks that might occur as a result of differently shaped car seats may
be compensated for by using the fixing belts.
Important:
The fixing belts indicated are not an integral part of the safety system.
14
ual_LC-090408-WEST-print.indd 14 08.04.09 11