Ricoh Aficio MP 2500 Network Manual page 102

Monitoring and Configuring the Printer
Low: Toner
Malfunction: Duplex Unit
Malfunction: Finisher
Malfunction: Ext. Charge Unit
2
Malfunction: Tray 1
Malfunction: Tray 2
Malfunction: Tray 3
Malfunction: Tray 4
Memory Low: Copy
Memory Low: Data Storage
Memory Low: Fax Scanning
Memory Low: Scanning
Miscellaneous Error
Mismatch: Paper Size
Mismatch: Paper Size and Type
Mismatch: Paper Type
Near Replacing: Black PCU
Near Replacing: Develop. Unit K
Near Replacing: Fusing Unit
Nearly Full: Waste Toner
No Paper: Selected Tray
No Paper: Tray 1
No Paper: Tray 2
No Paper: Tray 3
No Paper: Tray 4
Not Detected: B2 Lever
Not Detected: Black Toner
Not Detected: Develop. Unit (K)
Not Detected: Duplex Feed Unit
Not Detected: Duplex Unit
94
Messages Description
The toner cartridge is not set correctly, or toner is al-
most running out.
There is a problem with the duplex unit.
There is a problem with the finisher.
There is a problem with the external charge unit.
There is a problem with tray 1.
There is a problem with tray 2.
There is a problem with tray 3.
There is a problem with tray 4.
Memory shortage has occurred while the copy was
operating.
Memory shortage has occurred while the document
was being accumulated.
Memory shortage has occurred while transmitting the
fax.
Memory shortage has occurred while the scanner was
working.
Other error has occurred.
Indicated paper tray does not contain paper of select-
ed size.
Indicated paper tray does not contain paper of select-
ed size and type.
Indicated paper tray does not contain paper of select-
ed type.
Prepare the new black photoconductor unit.
Prepare the new development unit (black).
Prepare the new fusing unit.
Waste toner bottle is nearly full.
There is no paper in specified tray.
There is no paper in tray 1.
There is no paper in tray 2.
There is no paper in tray 3.
There is no paper in tray 4.
B2 lever is not correctly set.
Black toner is not correctly set.
The development unit (black) is not correctly set.
The duplex unit is not correctly set.
The duplex feed unit is not correctly set.