Configure Network Printers; Add Printers - Lexmark 13R0243 - X4875 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Photo Network Manual

6
Click Share this printer, and assign a name to your printer.
7
Follow the directions on the computer screen until installation is complete.
Windows 2000 or Windows XP users only:
1
For more information, see the setup information that came with your printer.
2
Click Start Settings
3
Right-click your printer icon, and select Sharing.
4
Click Shared as, and assign a name to your printer.
5
Follow the directions on the computer screen until installation is complete.
Installing the shared printer on other network computers (on the client computers)
Using the peer-to-peer method
1
Go to a network computer that you want to enable
to print to the shared printer.
2
Insert the printer software CD.
3
Agree to the license agreement, and then click
Next.
4
Select Manual Setup.
5
From the Network Printer Setup dialog, select the
Peer-to-Peer client option, and then click Next.
6
Select the appropriate printer from the list, and then
click Next.
7
Select the software you want to install, and then click
Next.
8
When setup is complete, click Finished.
9
Repeat this procedure for each network computer
you want to access the shared printer.

Configure network printers

Configure
To configure a network printer, select a printer from the list in the window. Click Configure to assign the printer an
Internet Protocol (IP) address. Contact your system support person for more information.

Add printers

Specify remote subnets that may have direct network attached printers. If the software detects a direct network
attached printer, you must first highlight the printer in the window, and then click Configure to manually assign an
IP address to the printer. Contact your system support person for more information.
Note: The software does not automatically configure printers found on remote subnets.
Refresh
Click Refresh to have the Configuration Utility automatically search to find and configure newly added printers.
Printers.
Using the point-and-print method
1
Go to a network computer that you want to enable to
print to the shared printer.
2
Browse the Network Neighborhood until you find the
name of the shared printer assigned in step 4 on
page 37.
3
Right-click the printer icon, and select Open or
Connect.
4
This will copy a subset of the printer software from
the host computer. A printer object will be created in
the Printers folder of the client.
37