Understanding Warning Levels - Lexmark 13R0243 - X4875 USB 2.0/PictBridge/ 802.11g All-in-One Color Printer Scanner Copier Photo Network Manual

Check cartridges
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
3
Reinsert the cartridges.
Check printer default and pause settings
1
Do one of the following:
•
In Windows Vista, click
•
In Windows XP, click Start.
2
Click Printers Printers and Faxes.
3
Double-click the printer queue device.
4
Click Printer.
•
Make sure no check mark appears next to Pause Printing.
•
If a check mark does not appear next to Set As Default Printer, you must select the print queue device for
each file you want to print.
Reconnect power supply
1
Press to turn the printer off.
2
Disconnect the power cord from the wall outlet.
3
Gently remove the power supply from the printer.
4
Reconnect the power supply to the printer.
5
Plug the power cord into the wall outlet.
6
Press to turn the printer on.
Remove and reinstall the software
Uninstall the printer software, and then reinstall it.

Understanding Warning levels

•
A green check indicates system requirements were met.
•
A yellow question mark indicates system requirements were not met. Most major functions will work, but you
may experience some performance impact.
•
A red question mark indicates system requirements were not met. Most major functions may not work.
•
A red X indicates system requirements were not met. Installation will not continue.
For proper installation, make sure the computer supports all system requirements. System requirements are located
on the printer box.
Control Panel.
104
2