Kuryakyn 4025 Installation Manual

ISO BRAKE PEDAL PAD
PARTS INCLUDED
1 Chrome Pedal Top Half
1 Chrome Pedal Bottom Half
1 Large Rubber Insert
1 Small Rubber Insert
2 Socket Head Cap Screw #8–32 x .313"
2 Setscrew #10–32 x .250"
1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING K
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN
POTENTIAL DEATH OR SERIOUS INJURY.
ATTENTION!
This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and
functionality.
TOOLS SUGGESTED
Set of Hex Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition. Let cool.
WARNING! YOU WILL BE WORKING AROUND THE ENGINE AND EXHAUST
SYSTEM DURING INSTALLATION. ENSURE THAT THE ENGINE
AND EXHAUST SYSTEM HAVE FULLY COOLED TO PREVENT
INJURY.
STEP 2
See PIC 1. Start the set
screws in the Locations
marked "1" and "4".
Place the bottom cover
half in position under the
brake pedal. PIC 2
Tighten the set screw
marked "1".
-cont.-
4025-21MC-0911
ϋ
RYAKYN!
PIC 1
1
2
INSTALLATION
4025
INSTALLATION QUESTIONS
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
●The product must be properly installed,
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.'S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
your address to: Küryakyn, P.O. Box 339,
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
3
Be sure to ask your local dealer about other
4
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
CUSTOMER SERVICE
877.370.3604 (toll free)
techsupport@kuryakyn.com
or call 715.247.2983
LIMITED WARRANTY
product(s).
maintained and operated under
normal conditions.
products.
●Küryakyn shall not be liable for any
Küryakyn and a customer.
applications other than intended.
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
Send the Proof-of-Purchase below with
Somerset, WI 54025.