Kuryakyn 7587 Installation Manual

PREMIUM EXTENDED BRAKE PEDAL PAD
PARTS INCLUDED
1 Premium Extended Brake Pedal Assembly for Harley Davidson ®
1 Hardware Kit Containing
1 5/16" Fender Washer
1 5/16" Lock Washer
1 5/16"-18 Acorn Nut
1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING K
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING
THE CONTENTS DESCRIBED HEREIN CAN RESULT IN
POTENTIAL DEATH OR SERIOUS INJURY.
ATTENTION!
This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and
functionality.
TOOLS SUGGESTED
Set of Combination Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition. Remove the stock brake pedal pad.
STEP 2
Align the chrome brake pad base to the brake pedal. PIC 1 Insert the stud on
the Rubber Pad through the Chrome Base so it protrudes out the back of the
brake pedal.
STEP 3
Install the Fender Washer, then the Lock Washer, then the Acorn nut. PIC 2 As
you tighten the Acorn nut, make sure
that the Rubber Pad stays square in the
recessed portion of the Chrome Base.
Tighten securely.
ATTENTION!
It is the installer's responsibility to
ensure that all of the fasteners
(including pre-assembled) are
tightened before operation of the
motorcycle. Küryakyn will not issue a
warranty on components lost due to
improper installation. Periodic
maintenance may be required.
WARNING! ENSURE THAT THE
INSTALLATION OF THIS
PRODUCT DOES NOT INTERFERE
WITH THE PROPER OPERATION
OF THE MOTORCYCLE BRAKE
PEDAL BEFORE RIDING.
Ride On!
7587-21HD-0411
ϋ
RYAKYN!
PIC 1
INSERT STUD ON RUBBER PAD HERE
PIC 2
FENDER WASHER
LOCK WASHER
ACORN NUT
INSTALLATION
7587
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
●The product must be properly installed,
maintained and operated under
normal conditions.
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
●Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.'S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Somerset, WI 54025.
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
product(s).
products.