Tyger TG-FF8F4388 Manual

ATTENTION!
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION. PLEASE FOLLOW THE APPROVED
INSTALLATION ACCORDING TO THE WRITTEN INSTRUCTIONS.
FAILURE TO DO SO MAY CAUSE DAMAGE TO YOUR VEHICLE
AND INVALIDATE THE WARRANTY.
WARNING!
PARTICLES & DIRT STUCK BETWEEN INSTALLED FLARES AND
VEHICLE'S FENDERS MAY CAUSE SCRATCHING AND PAINT WEAR
FROM VEHICLE VIBRATION. INSTALLATION IS DONE WITH
BUYER'S AND/OR USER'S UNDERSTANDING THAT THIS DAMAGE
MAY POTENTIALLY OCCUR.TYGER™ IS NOT RESPONSIBLE FOR
ANY DAMAGE FROM THIS CAUSE.
PRIOR TO INSTALLATION: PRIOR TO INSTALLATION: PRIOR TO INSTALLATION: PRIOR TO INSTALLATION:
USE NON-ABRASIVE USE NON-ABRASIVE USE NON-ABRASIVE USE NON-ABRASIVE
CHECK EVERYTHING CHECK EVERYTHING CHECK EVERYTHING CHECK EVERYTHING
SURFACE TO INSTALL SURFACE TO INSTALL SURFACE TO INSTALL SURFACE TO INSTALL
BEFORE INSTALLATION BEFORE INSTALLATION BEFORE INSTALLATION BEFORE INSTALLATION
REMOVE DECALS & REMOVE DECALS & REMOVE DECALS & REMOVE DECALS &
MUD FLAPS FIRST MUD FLAPS FIRST MUD FLAPS FIRST MUD FLAPS FIRST
ABOUT PAINTING:
SAFETY INFORMATION: SAFETY INFORMATION: SAFETY INFORMATION:
NO RETURN FOR
NO AUTOMATIC NO AUTOMATIC NO AUTOMATIC CHECK TIGHTNESS
PAINTED ITEMS CLEAN ALLOWED
BRUSH-STYLE WASH BRUSH-STYLE WASH BRUSH-STYLE WASH
ABOUT PAINTING: Painted flares cannot be returned. Test fit ABOUT PAINTING: Painted flares cannot be returned. Test fit ABOUT PAINTING: Painted flares cannot be returned. Test fit
before painting. We are not responsible for any costs that may before painting. We are not responsible for any costs that may before painting. We are not responsible for any costs that may
incur if flares were painted without test fitting. incur if flares were painted without test fitting. incur if flares were painted without test fitting.
• Clean surface to be painted with a good grade degreaser. Do • Clean surface to be painted with a good grade degreaser. Do • Clean surface to be painted with a good grade degreaser. Do
ADHESION PROMOTER USE HIGH QUALITY
not use lacquer thinner or any solvent based product. not use lacquer thinner or any solvent based product. not use lacquer thinner or any solvent based product.
IS REQUIRED AUTOMOTIVE PAINT
• Wipe flare surface completely dry with a tack rag prior to paint. • Wipe flare surface completely dry with a tack rag prior to paint. • Wipe flare surface completely dry with a tack rag prior to paint.
SAFETY INFORMATION:
• Application of plastic adhesion promoter for PP plastic as per • Application of plastic adhesion promoter for PP plastic as per • Application of plastic adhesion promoter for PP plastic as per
your paint system manufacturer's recommendations is required. your paint system manufacturer's recommendations is required. your paint system manufacturer's recommendations is required.
• Use a high quality enamel or polyurethane automotive paint to • Use a high quality enamel or polyurethane automotive paint to • Use a high quality enamel or polyurethane automotive paint to
paint the flares. paint the flares. paint the flares.
• Not recommend to paint the edge trim, but if desired use a flex • Not recommend to paint the edge trim, but if desired use a flex • Not recommend to paint the edge trim, but if desired use a flex
additive. additive. additive. NO AUTOMATIC CHECK TIGHTNESS
TG-FF8F4388
VERIFY FITMENT OF VERIFY FITMENT OF VERIFY FITMENT OF VERIFY FITMENT OF
FLARES TO VEHICLE FLARES TO VEHICLE FLARES TO VEHICLE FLARES TO VEHICLE
ABRASIVE DETERGENT ABRASIVE DETERGENT ABRASIVE DETERGENT ABRASIVE DETERGENT
IS PROHIBITED IS PROHIBITED IS PROHIBITED IS PROHIBITED
NO SOLVENT DRY IT OUT
CHECK TIGHTNESS CHECK TIGHTNESS CHECK CAREFULLY CHECK CAREFULLY CHECK CAREFULLY
BEFORE PAINT
BEFORE DRIVE BEFORE DRIVE BEFORE DRIVE
USE FLEX ADDITIVE
FOR EDGE PAINT
CHECK CAREFULLY
Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact
TOOLS FOR EASIER INSTALLATION
Utility Knife Electric Drill
7/32"
Socket Wrench Socket
HARDWARE KIT INCLUDED
34
338"
X
[A] [B]
Edge Trim Torx Bolt
6
X
[F]
U-Clip PH Truss Screw
2
X
[J]
S-Clip PH Metal Screw
2
X
Inner Bracket
Passenger/Right Side
Front Flare
Passenger/Right Side
Rear Flare
DAMAGED or MISSING parts?
www.TygerAuto.com/Contact
Page 1/7
1/4" Drill Bit #2 Phillips Driver
9/32" 10mm
Socket Socket
34
34
X
X
[C] [D]
SS Washer
Nylock Nut
14 10
X X
[G] [H]
Mylar Tab
2 2
X X
[K] [L]
Nylon Retainer Edge Trim Tool
NOTE:
Driver's side Inner Bracket is marked with "LR",
passenger's side Inner Bracket is marked with "RR".
Driver/Left Side
Front Flare
Driver/Left Side
Rear Flare
1/2" Wrench
Grease Pencil
1
X
[E]
T45 Torx Bit
8
X
[I]
Long U-Clip
1
X
[M]
V210322