Tyger TG-FF8F5018 Manual

FENDER FLARE
ATTENTION!
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING
INSTALLATION. FOLLOW EACH STEP AS DESCRIBED ON THIS
OFFICIAL GUIDE. FAILURE TO DO SO MAY CAUSE DAMAGE TO
YOUR VEHICLE AND VOID THE WARRANTY.
WARNING!
DIRT OR DEBRIS MAY BECOME LODGED BETWEEN FLARES AND
BODY PANEL CAUSING SCRATCHING AND PAINT-WEAR AS A
RESULT OF VEHICLE VIBRATION. TYGER™ IS NOT RESPONSIBLE
FOR SUCH DAMAGE, AND INSTALLATION IS DONE WITH BUYER'S
UNDERSTANDING THAT THIS DAMAGE MAY OCCUR.
PRIOR TO INSTALLATION:
PRIOR TO INSTALLATION: PRIOR TO INSTALLATION: PRIOR TO INSTALLATION:
CHECK EVERYTHING USE NON-ABRASIVE
CHECK EVERYTHING CHECK EVERYTHING CHECK EVERYTHING USE NON-ABRASIVE
SURFACE TO INSTALL
BEFORE INSTALLATION SURFACE TO INSTALL
BEFORE INSTALLATION BEFORE INSTALLATION BEFORE INSTALLATION
REMOVE DECALS &
REMOVE DECALS & REMOVE DECALS & REMOVE DECALS &
MUD FLAPS FIRST
MUD FLAPS FIRST MUD FLAPS FIRST MUD FLAPS FIRST
ABOUT PAINTING:
SAFETY INFORMATION:
SAFETY INFORMATION: SAFETY INFORMATION:
NO RETURN FOR NO AUTOMATIC
NO AUTOMATIC NO AUTOMATIC
PAINTED ITEMS BRUSH-STYLE WASH CLEAN ALLOWED
BRUSH-STYLE WASH BRUSH-STYLE WASH
ABOUT PAINTING: Painted flares cannot be returned. Test fit ABOUT PAINTING: Painted flares cannot be returned. Test fit ABOUT PAINTING: Painted flares cannot be returned. Test fit
before painting. We are not responsible for any costs that may
before painting. We are not responsible for any costs that may before painting. We are not responsible for any costs that may
incur if flares were painted without test fitting.
incur if flares were painted without test fitting. incur if flares were painted without test fitting.
• Clean surface to be painted with a good grade degreaser. Do • Clean surface to be painted with a good grade degreaser. Do • Clean surface to be painted with a good grade degreaser. Do
ADHESION PROMOTER USE HIGH QUALITY
not use lacquer thinner or any solvent based product. not use lacquer thinner or any solvent based product. not use lacquer thinner or any solvent based product.
IS REQUIRED AUTOMOTIVE PAINT
• Wipe flare surface completely dry with a tack rag prior to paint. • Wipe flare surface completely dry with a tack rag prior to paint. • Wipe flare surface completely dry with a tack rag prior to paint.
SAFETY INFORMATION:
• Application of plastic adhesion promoter for PP plastic as per
• Application of plastic adhesion promoter for PP plastic as per • Application of plastic adhesion promoter for PP plastic as per
your paint system manufacturer's recommendations is required.
your paint system manufacturer's recommendations is required. your paint system manufacturer's recommendations is required.
• Use a high quality enamel or polyurethane automotive paint to
• Use a high quality enamel or polyurethane automotive paint to • Use a high quality enamel or polyurethane automotive paint to
paint the flares. paint the flares. paint the flares.
• Not recommend to paint the edge trim, but if desired use a flex • Not recommend to paint the edge trim, but if desired use a flex • Not recommend to paint the edge trim, but if desired use a flex
additive. additive. additive.
NO AUTOMATIC CHECK TIGHTNESS
TG-FF8F5018
VERIFY FITMENT OF
USE NON-ABRASIVE USE NON-ABRASIVE VERIFY FITMENT OF VERIFY FITMENT OF VERIFY FITMENT OF
FLARES TO VEHICLE
SURFACE TO INSTALL SURFACE TO INSTALL FLARES TO VEHICLE FLARES TO VEHICLE FLARES TO VEHICLE
ABRASIVE DETERGENT
ABRASIVE DETERGENT ABRASIVE DETERGENT ABRASIVE DETERGENT
IS PROHIBITED
IS PROHIBITED IS PROHIBITED IS PROHIBITED
CHECK TIGHTNESS NO SOLVENT CHECK CAREFULLY DRY IT OUT
CHECK TIGHTNESS CHECK TIGHTNESS CHECK CAREFULLY CHECK CAREFULLY
BEFORE PAINT BEFORE DRIVE
BEFORE DRIVE BEFORE DRIVE
USE FLEX ADDITIVE
FOR EDGE PAINT
CHECK CAREFULLY
Customer Support: www.tygerauto.com/contact
Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact Customer Support: www.TygerAuto.com/Contact
Parts List:
Driver/Left Side
Front Flare
Driver/Left Side
Rear Flare
2
X
Inner Bracket
348" 34
X
[A] [B]
Edge Trim Torx Bolt
8 6
X X
[F] [G]
5/8" 5/16"
PH Truss Screw PH Truss Screw
4 1
X X
[K] [L]
Nylon Retainer Edge Trim Tool
Tools For Easier Installation
Utility Knife #2 Phillips Driver
Electric Drill Grease Pencil
DAMAGED or MISSING parts?
www.tygerauto.com/contact
Page 1/7
®
Passenger/Right Side
Front Flare
Passenger/Right Side
Rear Flare
NOTE: Both inner brackets are identical
34 34
X X
[C] [D]
T45 Torx Bit
SS Washer Nylock Nut
2 6
X X
[H] [I]
Long U Clip S-Clip
1/2" Wrench Socket Wrench
Work Gloves
V2300616
1
X
[E]
6
X
[J]
Mylar Tab