Videomate V300 Tv Box Using Guide - COMPRO V300 - START UP GUIDE Manual

VideoMate V300 TV Box Using Guide

Using at the first time
Please refer to the above for correct setup to use V300 TV Box. After you have
connected the power adaptor, you will see orange light shining out from the
side. Press the Power switch at the top will turn on the TV Box and you will see
orange light become blue light. Please use Auto Scan to remove channels
without signal. Now you may enjoy the TV Show.
If you have connect V300 TV box to your computer's video card, press the
power button on the TV box or the power button on the remote control will
switch between TV and PC signal. You may also press "TV/PC" button on the
remote control to achieve the same result.
Order of the Sources: TV > Composite > S-Video > Component > TV
VideoMate V300 TV Box supports 9 resolutions from below. Each resolution
Supports 60Hz and 75Hz. The default setting is 1024*768 @ 60Hz.
Resolution 1 -> 640*480 (4:3)
Resolution 2 -> 800*600 (4:3)
Resolution 3 -> 1024*768 (4:3)
Resolution 4 -> 1280*720 (16:9)
Resolution 5 -> 1280*1024 (5:4)
To change resolution, please open up menu and select the resolution you want.
Refer to later instruction for more detail. "RES" button from the remote
controller can also switch the resolution.
If using PIP feature, the refresh rates in Windows support resolutions below:
Resolution
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 1024
1280 x 720
1440 x 900
1400 x 1050
1600 x 1200
1680 x 1050
6
Resolution 6 -> 1400*1050 (4:3)
Resolution 7 -> 1440*900 (16:10)
Resolution 8 -> 1600*1200 (4:3)
Resolution 9 -> 1680*1050 (16:10)
Support Refresh Rate
60 Hz 70 Hz
Yes
Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes
Yes Yes
72 Hz
- Yes
- Yes
Yes
-
Yes
Yes
Yes
Yes
- Yes
Yes
75 Hz
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes