Related Manuals for COMPRO V600 - START UP GUIDE
Summary of Contents for COMPRO V600 - START UP GUIDE
- Page 1 VideoMate V600 Analog Standalone TV Box Start Up Guide Compro Technology, Inc. www.comprousa.com...
- Page 2 Copyright © 2001-2008. Compro Technology, Inc. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Compro Technology, Inc. Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are trademarks of Compro Technology, Inc.
-
Page 3: Table Of Contents
Table of Contents About This Guide .............. 2 VideoMate V600 TV Box Contents ........3 VideoMate V600 TV Box Hardware Guide......4 Remote Control Key Definition and Use ......5 VideoMate V600 TV Box Using Guide ......6 Troubleshooting............... 12... -
Page 4: About This Guide
About This Guide This guide provides you the information on how to install and use your VideoMate V600 Analog Standalone TV Box. VideoMate V600 Analog Standalone TV Box lets you watch TV with your computer monitor. V600 TV Box also provides the input base stand to allow you to connect other video devices (i.e. -
Page 5: Videomate V600 Tv Box Contents
VideoMate V600 TV Box Contents Remote Control VideoMate V600 Start Up Guide (with 2 AAA batteries) TV Box Power Adaptor Audio Cable D-sub Cable Base Holder... -
Page 6: Videomate V600 Tv Box Hardware Guide
VideoMate V600 TV Box Hardware Guide Power SW (Hold 2 sec.) 12V Power Jack Ear Phone Menu Line In from PC Jack Channel + Line Out to Speaker Volume – Volume + Connect to Computer Channel – (15 pin D-sub input) Connect to Monitor (15 pin D-sub output) TV Cable/Antenna... -
Page 7: Remote Control Key Definition And Use
Remote Control Key Definition and Use POWER Power On/Off MUTE Mute DISPLAY Display OSD Info. TV/PC Switch TV/PC Mode SOURCE Video Source Switch SLEEP Sleep Mode Picture In Picture PIP AUDIO Switch audio between TV and PC Switch Resolution CH.SURF Channel Surfing SET FAV. -
Page 8: Videomate V600 Tv Box Using Guide
VideoMate V600 TV Box Using Guide Using at the first time Please refer to the above for correct setup to use V600 TV Box. After you have connected the power adaptor, you will see orange light shining out from the side. - Page 9 OSD Menu Guide Menu button will open up OSD Menu, please use the direction key to navigate. (Picture) (TV) (Monitor) (OSD) (Sound) Brightness Adjust the brightness (0~100) Default : 50 Contrast Adjust the Contrast (0~100) Default : 50 Saturation Adjust the Saturation (0~100) Default : 50 Sharpness Adjust the Sharpness (0~15)
-
Page 10: Channel Swap
(Picture) (TV) (Monitor) (OSD) (Sound) OSD Position Press OK key, use direction keys to move OSD position OSDTransparency 1 Language Select your language Reset All Settings NO/YES (1 Cancel / 2 Reset All Settings) Information VideoMate V600 Version information Country/Region Select your country or region (Picture) (TV) -
Page 11: Channel Surfing
PIP (Picture In Picture) You can start PIP function by clicking “PIP” button on the remote control. It allows you to watch TV on the Windows desktop. When PIP is working, press “PIP” button again will change the size of the TV screen; you may zoom twice and the third time you press “PIP”, it will close the PIP function. - Page 12 OptiRatio OptiRatio Aspect Selection provides 4:3, 16:9, Panorama, Full Screen, and SmartZoom aspect ratio selections to provide the best TV and video watching on different type monitors. 4:3 Mode: When the 4:3 formats TV/video display on 16:9/16:10 wide-screen monitors, it can keep the 4:3 aspect ratio video and add letter box on both left and right sides.
- Page 13 Panorama Mode: Extend all the input TV and video to full screen display. But the distortion on the center of screen will be less than full screen mode and looks better. Original video format 4:3 Less distortion from center SmartZoom Mode: When the 16:9 movie broadcast from TV channel, it will add the letter box for 4:3 video format transmit and it looks small on the 16:9/16:10 wide-screen monitors.
-
Page 14: Troubleshooting
Troubleshooting Installation The most common cause of the problem is the incorrect connection of the cables. Please refer to “VideoMate V600 TV Box Hardware Guide” on proper connection. And also please check the power adaptor already plugged. Warning It is normal for VideoMate V600 TV Box become warm when it is being used. Please place the TV Box at a place where the air flows. - Page 15 Please press and hold the Menu button of the V600 for 8 second until it display Reset All Settings Please wait… Contacting Compro Technical Support Before you submit an email for support, please check support FAQs on our web site. http://www.comprousa.com/support You may fill out the form (http://comprousa.com/support/form.htm) or directly...