COMPRO V300 - START UP GUIDE Manual page 9

VideoMate V300 includes the special base holder with video/audio input to
provide S-video, composite video, stereo audio, and component (Y, Pb, Pr)
video input. You can easy connect the TV box with DVD player, VCR, DV, or
Xbox/Wii/PS 3 game consoles to watch DVD movies or play games on your
monitor.
When using Component input, the format will be automatically detected by
VideoMate V300; you do not need to select between 480i, 480p, 576p, 720p,
or 1080i.
The Component input that VideoMate V300 supports are the following:
SDTV：480i, 576i
HDTV：480p @ 60Hz, 576p @ 50Hz, 720p @ 60Hz, 1080i @ 60Hz
Note: This is the refresh rate of your input device, is not the refresh rate of your
monitor.
OSD Menu Guide
Menu button will open up OSD Menu, please use the direction key to navigate.
(Picture)
Brightness
Contrast
Saturation
Sharpness
Hue
OptiColor Mode
(Picture)
Input Signal Select Air or Cable for TV input signal type. Default is Air
Channel
Set a name for specific channel. (5 letter/numbers)
Rename
Fine tune Fine tune frequency if TV is unclear. (0~100) default is 50
Auto Scan Recommend to use Auto Scan for the first time. (NO/YES)
Channel Swap Swap the channel numbers to your preference. (NO/YES)
CH Add/Erase Add or Erase channel.
Channel Video Change video standard for current channel.
System PAL (B/G, D/K, I) SECAM (B/G, D/K)
(TV) (Monitor)
Adjust the brightness (0~100) Default : 50
Adjust the Contrast (0~100)
Adjust the Saturation (0~100)
Adjust the Sharpness (0~15)
Adjust the Hue ( 0~100)
3 presets modes and 5 custom modes of picture settings.
(TV) (Monitor)
(OSD)
Default : 50
Default : 50
Default : 0
Default : 50
(OSD)
(Sound)
(Sound)
7