Table of Contents
Advertisement
Why PIP does not work
?
Please make sure you have connected your computer VGA to V300 and
connect V300 to the monitor. For more information, please refer to page 4 for
detail description.
If your display card of your computer has both DVI and VGA connected, please
make sure the settings in Windows is set to VGA output.
Please also check if your desktop resolution is one of our supported
resolutions. Please refer to bottom of Page 6 for detail list of resolutions.
Why does the remote control fail
?
Please make sure you have put the batteries to the remote control. And we
suggest not using rechargeable batteries.
Please aim at the TV box and you should see the blue light flashes when you
press the remote controller.
How to reset to manufactory defaults
?
Please press and hold the Menu button of the V300 for 8 second until it display
Reset All Settings
Please wait...
Contacting Compro Technical Support
Before you submit an email for support, please check support FAQs on our
web site. http://www.comprousa.com/support
You may fill out the form (http://comprousa.com/support/form.htm) or directly
email to support@comprousa.com
P/N: 3GA0310241
14
Hide quick links:
Advertisement
Table of Contents
