Related Manuals for COMPRO W700F - START UP GUIDE
Summary of Contents for COMPRO W700F - START UP GUIDE
- Page 1 VideoMate W700F Standalone TV Box Start Up Guide Compro Technology, Inc. www.comprousa.com...
-
Page 2: Table Of Contents
VideoMate W700F TV Box Using Guide ......9 Troubleshooting ............... 15 Copyright © 2001-2010. Compro Technology, Inc. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of Compro Technology, Inc. -
Page 3: About This Guide
About This Guide This guide provides you the information on how to install and use your VideoMate W700F standalone TV box. VideoMate W700F standalone TV box lets you watch analog TV with your computer monitor without driver or applications install. W700F TV box provides S-video, composite video, and up to 1080i component video input which allow you to connect other video devices (i.e. -
Page 4: Videomate W700F Tv Box Contents
VideoMate W700F TV Box Contents... -
Page 5: Install W700F Tv Box With Box Stand
Install W700F TV Box with Box Stand Step 1 Step 2 Step 3 Step 4... -
Page 6: Videomate W700F Tv Box Connection
VideoMate W700F TV Box Connection... -
Page 7: Buttons On Videomate W700F Tv Box
Buttons on VideoMate W700F TV Box Power On/Off Source Switch Analog TVFMComposite video S-videoComponent video Open OSD Menu Volume Up Volume Down Channel Up Channel Down... -
Page 8: Remote Control Key Definition And Use
Remote Control Key Definition and Use Power Power On/Off Mute Mute Sleep mode Sleep (OFF510153060 90120 minutes) Picture In Picture On/Off and screen size select 9 Channels preview Ch. Surf Set to favorite channel list Set Fav. Switch Resolution Resolution Switch audio between PIP Audio TV and PC in PIP mode... -
Page 9: Videomate W700F Tv Box Using Guide
VideoMate W700F TV Box Using Guide Using at the first time Please refer to the above for correct setup to use W700/W700F TV box. After you have connected the power adaptor, you can press the power switch to turn on the TV box and you will see the green LED light beside the power button. The default TV settings will be your local country and TV system, and you can change it from OSD menu later. - Page 10 Picture Brightness Adjust the brightness (0~100) Contrast Adjust the Contrast (0~100) Saturation Adjust the Saturation (0~100) Adjust the Hue ( 0~100) Sharpness Adjust the Sharpness (0~15) OptiMode 3 preset modes (Standard/TV, Game, and Cinema) and 5 custom modes of picture settings. You can adjust the color settings then save it in custom mode.
-
Page 11: Channel Swap
Language Select your language (Default is your local country) OSD Position YES/NO (Default is NO) OSD Transparency 0-100 Information VideoMate W700F Version information Reset all settings NO/YES (1 Cancel / 2 Reset All Settings) Audio Settings Volume Adjust volume (0-100) Treble Adjust Treble volume (0-15) Bass... -
Page 12: Channel Surfing
pages of the list. Select the channel number that you wish to swap and press OK, and then enter the number of the channel that you wish to switch. To reset to the original channel numbers, please rescan the channel table again by selecting Auto Scan in the menu. - Page 13 switch to that channel. OptiRatio OptiRatio Aspect Selection provides 4:3, 16:9, Panorama, Full Screen, and SmartZoom aspect ratio selections to provide the best TV and video watching on different type monitors. 4:3 Mode: When the 4:3 formats TV/video display on 16:9/16:10 wide-screen monitors, it can keep the 4:3 aspect ratio video and add letter box on both left and right sides.
-
Page 14: Dynamic Bass Boost
Panorama Mode: Extend all the input TV and video to full screen display. But the distortion on the center of screen will be less than full screen mode and looks better. Original video format 4:3 Less distortion from center SmartZoom Mode: When the 16:9 movie broadcast from TV channel, it will add the letter box for 4:3 video format transmit and it looks small on the 16:9/16:10 wide-screen monitors. -
Page 15: Troubleshooting
please press the MENU button and select Sound section, then adjust the volume of Stereo Effect higher for greater effect. You may refer to the OSD Menu Guide above for exact location. SAP Mode (Only appears in PAL/SECAM TV system area) SAP Mode is a function that will allow you to broadcast Main Audio Channel in the left and Sub Audio Channel in the right. - Page 16 Please also check if your desktop resolution is one of our supported resolutions. Please refer to the detail list of resolutions. Contacting Compro Technical Support Before you submit an email for support, please check the troubleshooting list above. You may fill out the form (http://comprousa.com/en/form.htm) or directly email to support@comprousa.com...
Need help?
Do you have a question about the W700F - START UP GUIDE and is the answer not in the manual?
Questions and answers