Standard Equipment And Specifications - Alamo A60 Operator's Manual

Standard Equipment and Specifications

1.
Horsepower Required (Min.)
Cutting Capacity (Max.)
Cutting Height
Safety Deflector
Cutting Width
Overall Width
Overall Length
Weight (Approx.)
Hitch
Blade Carrier
Gearbox Rating:
540 RPM
Output Shaft Diameter
Blade Tip Speed:
540 RPM
Driveline Size
Driveline Protection
Deck Thickness
Side Skirt
Tires & Wheel
Transport Width
Slip Clutch
Replaceable Skid Shoes
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower
in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause
Mower component damage and equipment failure resulting in possible serious injury or death.
A60/A72 01/08
©2008 Alamo Group Inc.
OPERATION
A60
30 HP
3"
1 9/16" - 12"
Std.
60"
67-1/4"
108"
810 lbs.
CAT I
Pan
90 HP*
2"
12,469 FPM
Cat 4
Slip Clutch
3/16"
1/4" x 9"
Laminated
67-1/4"
Std.
Std.
Operation Section 4-3
A72
40 HP
3"
1 9/16" - 12"
Std.
72"
79-1/4"
118"
975 lbs.
CAT II
Pan
90 HP*
2"
14963 FPM
Cat 4
Slip Clutch
3/16"
1/4 x 9"
Laminated
79-1/4"
Std.
Std.
(SGM-14)