Standard Equipment And Specifications - Alamo 00759354C Operator's Manual

Standard Equipment and Specifications

1.
Horsepower Required (Min.)
Cutting Capacity (Max.)
Cutting Height
Safety Deflector
Cutting Width
Overall Width
Overall Length
Weight (Approx.)
Hitch
Blade Carrier
Gearbox Rating:
540 RPM
Output Shaft Diameter
Blade Tip Speed:
540 RPM
Driveline Size
Driveline Protection
Deck Thickness
Side Skirt
Tires & Wheel
Transport Width
Slip Clutch
Replaceable Skid Shoes
*Ratings based on actual field performance.
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower's rated capacity or to cut any type of non-vegetative material. Only
operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for
which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component
damage and equipment failure resulting in possible serious injury or death.
A60B/A72B 02/07
©2007 Alamo Group Inc.
OPERATION
A60B
30 HP
2"
1 9/16" - 12"
Std.
60"
67-1/4"
108"
725 lbs.
CAT I
Pan
90 HP*
2"
12,469 FPM
Cat 4
Slip Clutch
10-Gauge
1/4" x 9"
Laminated
67-1/4"
Std.
Std.
Operation Section 4-3
A72B
35 HP
2"
1 9/16" - 12"
Std.
72"
79-1/4"
118"
876 lbs.
CAT II
Pan
90 HP*
2"
14963 FPM
Cat 4
Slip Clutch
10 Gauge
1/4 x 9"
Laminated
79-1/4"
Std.
Std.
(SGM-14)