AUDIOLINE Sensor 500 Initial Setup Manual

SENSOR 500 INITIAL SETUP

On pages 5 & 6 of this manual, references to the display showing:"--------"
should read: display showing "INSERT 10/0"
If you are a Centrex user, the phone needs to be programmed to insert "10"
If you are not using Centrex, the phone must be set to insert "0"
• Press
• Press
• Press
• For Centrex "10" must be flashing.
• For Non-Centrex "0" must be flashing.
• Press
When you first connect your Sensor 500 and are using Telecom Call Minder
service you will need to program the PLAY button.
• Press
• Press and hold down
• Dial 083210.
• Press
• Dial your call minder PIN number. (Please note that this number will
show on the display each time the
• Press #
• Press
• Dial "1"
• Press
• Press
Downloaded from: http://www.guardianalarms.net
and hold until diplay shows: "INSERT 10/0".
to select.
to select "0" or "10" (current selection will flash).
to set.
to store
to finish.
until the display shows text, then release
key is pressed.)