MINN KOTA Talon Manual

MOUNTING AND ADAPTER BRACKETS
Just like Talon locks you to your spot in the water, our mounting and adapter brackets keep Talon locked on
your boat in any condition. Unparalleled strength combined with an innovative modular design, so it's easy
to select the right mount and get Talon rigged up on any boat.
CHOOSING YOUR BRACKET
Selecting the right Talon bracket is as easy as 1-2...well that's it.
Just answer these two questions to find the bracket you need.
1
DO YOU NEED AN ADAPTER BRACKET?
This depends on whether you have a flat or curved transom. If you
have a flat transom, we recommend mounting Talon directly to
it (all hardware is included for this) without an adapter bracket.
If you have a curved transom, you'll need an adapter bracket.
2
IF YOU DO NEED A BRACKET, WHICH KIND?
There are two types of Talon adapter brackets: Jack Plate and
Sandwich-Style.
Side-Mounted Jack Plate Adapter Brackets
Mount Talon directly to the side of your jack plate, on either the
port or starboard side of your boat.
Sandwich-Style Adapter Brackets
Mount Talon between your jack plate and transom OR between
the outboard and transom, on either the port or starboard side
of your boat.
.
JACK PLATE
ADAPTER
BRACKET
SANDWICH-
STYLE ADAPTER
BRACKET
TALON AND HUMMINBIRD 360˚ DUAL
**
MOUNT EXTENSION PLATE
If you want to mount a Talon
and a Humminbird 360 on
°
the same bracket, you'll
need our Dual Mount
Extension Plate accessory.
**Only compatible with new Universal Modular Adapter Brackets.
FLAT TRANSOM
NO ADAPTER NEEDED
All hardware included for
direct-to-transom installation.
FULLY ADJUSTABLE BRACKETS
With a universal design that fits any transom, our brackets
can be adjusted and tweaked to the perfect orientation.
And once you've got Talon where you want it, interlocking
teeth clamp down to lock it into place.
ITEM # UNIVERSAL MODULAR ADAPTER BRACKETS
1810300 Talon/Humminbird 360˚ Side-Mounted Jack Plate*
1810302
Talon/Humminbird 360˚ Sandwich-Style** - Port
Talon/Humminbird 360˚ Sandwich-Style** - Starboard
1810303
* Minn Kota Talon Side-Mounted Jack Plate Adapter Brackets include hardware for Atlas hydraulic, Z-Lock manual, and Slidemaster manual jack plates. Not
all jack plates are equipped with mounting holes to accept side mount adapter brackets. Drilling holes to accept side mount adapter brackets may void your
manufacturers warranty. Minn Kota is not responsible for damage that may result.
OTHER TALON MOUNTING ACCESSORIES
ITEM # DESCRIPTION
1810210
Talon Spacer Block Kit***
1810211
Talon BMS Spacer Block Kit – for sandwich mounting between outboard and jack plate
1810212
Talon BMS Side Shim Kit – fills recess gap on side of BMS jack plate; for jack plate mounting
1810220
Setback Bracket, 6" — for direct mount installations only
1810237
Talon and Humminbird 360 ° Dual Mount Extension Plate
** *NOTE: Some earlier Atlas hydraulic jack plates do not have mounting holes drilled
from the factory. Jack plates without mounting holes will have to be drilled and
may require part # 1810210 spacer block kit.
CURVED TRANSOM
SIDE-MOUNTED
JACK PLATE ADAPTER BRACKET
*
CURVED TRANSOM
SANDWICH-STYLE
ADAPTER BRACKET
PORT STARBOARD
CHOOSE WHICH SIDE YOU
WOULD LIKE TO MOUNT
YOUR TALON
SETBACK PORT/STARBOARD
Variable Port/Starboard
Variable Port
Variable Starboard
SETBACK PORT/STARBOARD
NA Both
NA Both
NA Both
6" Both
NA Both
ADDED SECURITY
All mounting and adapter brackets
carry a five-year warranty.
09/12/2012