Advertisement
Quick Links
TV STAND WITH THREE CABINETS
50" MAXIMUM FLAT PANEL TELEVISION
SCAN QR CODE FOR
E-MANUAL, IF DESIRED
ASSEMBLY·INSTRUCTIONS
We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,
step by step instructions will guide you through the project from start to finish .
Feel confident that this will be a fun and rewarding project . The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment .
Please do not return to the store
STOP
Broken or missing parts?
Need help with assembly?
Our Illinois based customer service team is ready to help with any problems or questions you may have.
Please give us a call (Toll Free) at 1-800-468-6447, or email us at parts@convenience-concepts.com.
Normal hours of Operation: M-F* 8am-4pm CST.
*Excludes Holidays
This product's warranty is only valid through authorized dealers.
80 LB. MAXIMUM CAPACITY
151202
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for convenience concepts 151202
Summary of Contents for convenience concepts 151202
- Page 1 TV STAND WITH THREE CABINETS 50” MAXIMUM FLAT PANEL TELEVISION 80 LB. MAXIMUM CAPACITY 151202 SCAN QR CODE FOR E-MANUAL, IF DESIRED ASSEMBLY·INSTRUCTIONS We have designed our furniture with you , the customer in mind . Our clear , easy to follow , step by step instructions will guide you through the project from start to finish .
-
Page 2: Hardware List
PAGE 2 OF 6 Hardware List Panel List Cambolt&Camlock (16pcs) Top panel (1pc) Wood dowel (16pcs) Knob (3pcs) Spring insert (4pcs) ht divider (1pc) Side panel (2pcs) Magnet (2pcs) racket (2pcs) Middle panel (1pc) Knob screw (3pcs) Nail (15pcs) Metal tube (5pcs) End cap (10pcs) Metal pin (8pcs) Back panel (1pc) - Page 3 PAGE 3 OF 6 Step 1 1.Insert cam locks (A) into left divider side panels and right divider Step 2 *Refer to page 2 for dowel assembly .* Step 3 and Right Divider Panel camlocks already in panels. *Note: Slots must face inside when installing middle dividers .* Step 4 1.Connect side panels...
- Page 4 PAGE 4 OF 6 Step 5 2.Insert the Metal Pins (I) into pre-drilled slots on Door 3.Slide pins in Door into slots in Divider Panels 4.Insert Pins (I) into holes in Divider panels Step 6 1.Screw cambolts (A) and insert wood dowels (B) into middle panel *Refer to page 2 for dowel assembly .* Step 7 1.Connect middle Panel...
- Page 5 PAGE 5 OF 6 Step 8 1.A ach Metal Tubes to assembly using End Caps , as shown. Step 9 Metal Tubes 2.A ach using End Caps Step 10 1.Turn the unit around , and using nails (H) . connect back panel...
- Page 6 PAGE 6 OF 6 Step 11 (G), as shown. 2.Insert spring inserts into doors. 3.Repeat for second door. Step 12 panel Step 13...
Need help?
Do you have a question about the 151202 and is the answer not in the manual?
Questions and answers