HIKVISION DS-K1T341 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-K1T341 Series
  6. User manual
HIKVISION DS-K1T341 Series User Manual

HIKVISION DS-K1T341 Series User Manual

Face recognition terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T341 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T341 Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K1T341 Series

Summary of Contents for HIKVISION DS-K1T341 Series

  • Page 1 DS-K1T341 Series Face Recognition Terminal User Manual...

  • Page 2: About This Manual

    WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...

  • Page 4: Symbol Conventions

    DS-K1T341 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.

  • Page 5: Regulatory Information

    DS-K1T341 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T341 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

  • Page 7: Safety Instruction

    DS-K1T341 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 8 DS-K1T341 Series Face Recognition Terminal User Manual • The device cover for indoor use shall be kept from rain and moisture. • Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger).

  • Page 9: Available Models

    DS-K1T341 Series Face Recognition Terminal User Manual Available Models Product Name Model Face Recognition Terminal DS-K1T341M Use only power supplies listed in the user instructions: Model Manufacturer Standard ADS-26FSG-12 12024EPG Shenzhen Honor Electronic Co.,Ltd MSA-C2000IC12.0-24P-DE MOSO Technology Co.,Ltd ADS-26FSG-12 12024EPB Shenzhen Honor Electronic Co.,Ltd...

  • Page 10: Table Of Contents

    DS-K1T341 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 2 Chapter 3 Installation ......................... 4 3.1 Installation Environment ......................4 3.2 Install with Gang Box (Large Mounting Plate) ................ 4 3.3 Install without Gang Box (Large Mounting Plate) ..............
  • Page 11 DS-K1T341 Series Face Recognition Terminal User Manual 6.3.2 Set RS-485 Parameters ....................35 6.3.3 Set Wiegand Parameters ..................... 37 6.4 User Management ....................... 38 6.4.1 Add Administrator ....................... 38 6.4.2 Add Face Picture ......................39 6.4.3 Add Card ........................41 6.4.4 Add Password ......................
  • Page 12 DS-K1T341 Series Face Recognition Terminal User Manual 6.10.3 Log Query ........................61 6.11 View System Information ....................62 6.12 Two-Way Audio ........................64 6.12.1 Call Client Software from Device ................64 6.12.2 Call Master Station from Device ................64 6.12.3 Call Device from Client Software ................65 6.12.4 Call Indoor Station from Device ................
  • Page 13 DS-K1T341 Series Face Recognition Terminal User Manual 7.4.11 Import and Export Person Identify Information ............84 7.4.12 Import Person Information ..................84 7.4.13 Import Person Pictures ..................... 85 7.4.14 Export Person Information ..................86 7.4.15 Export Person Pictures ....................86 7.4.16 Get Person Information from Access Control Device ..........
  • Page 14 DS-K1T341 Series Face Recognition Terminal User Manual 7.9 Door Control ........................116 7.9.1 Control Door Status ....................116 7.9.2 Check Real-Time Access Records ................117 7.10 Event Center ........................117 7.10.1 Enable Receiving Events from Devices ..............118 7.10.2 View Real-Time Events .................... 118 7.10.3 Search Historical Events ..................
  • Page 15 DS-K1T341 Series Face Recognition Terminal User Manual 7.12.12 Set Face Recognition Terminal Parameters ............148 7.12.13 Configure Face Picture Parameters ............... 149 7.12.14 Configure Supplement Light Parameters .............. 150 7.12.15 Set Device No......................150 7.12.16 Configure Video and Audio Parameters ..............150 7.12.17 Configure Volume Input or Output ...............

  • Page 16: Chapter 1 Overview

    DS-K1T341 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc.

  • Page 17: Chapter 2 Appearance

    DS-K1T341 Series Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal: Figure 2-1 Face Recognition Terminal Diagram Table 2-1 Description of Face Recognition Terminal Description Card Presenting Area...
  • Page 18 DS-K1T341 Series Face Recognition Terminal User Manual Description Note USB to micro USB cable is included in the package. IR Light Wiring Terminals Tamper Debugging Port Network Interface...

  • Page 19: Chapter 3 Installation

    DS-K1T341 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment • Avoid backlight, direct sunlight, and indirect sunlight. • For better recognition, there should be light source in or near the installation environment. Note For details about installation environment, see Tips for Installation Environment.
  • Page 20 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-2 Install Mounting Plate 4. Remove the two screws on the rear panel and remove the sheet to display the wiring terminals. 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables.
  • Page 21 DS-K1T341 Series Face Recognition Terminal User Manual Note Make sure the two sheets on each side of the mounting plate have been in the holes at the back of the device. Figure 3-4 Install Device 9. Use two supplied screws to secure the device and the mounting plate.

  • Page 22: Install Without Gang Box (Large Mounting Plate)

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-6 Apply Silicone Sealant on the Side 3.3 Install without Gang Box (Large Mounting Plate) Steps Note The additional force shall be equal to three times the weight of the equipment. The equipment ad its associated mounting means shall remain secure during the installation.
  • Page 23 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-7 Mounting Template 2. Drill holes on the wall or other surface according to the instructions on the mounting template. 3. Align the holes to the mounting plate and secure the mounting plate on the wall with the...
  • Page 24 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-8 Install Mounting Plate 4. Remove the two screws on the rear panel and remove the sheet to display the wiring terminals. 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables.
  • Page 25 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-10 Install Device 9. Use two supplied screws to secure the device and the mounting plate. Figure 3-11 Secure Device 10. Apply Silicone sealant among the joints between the device rear panel and the wall (except the...

  • Page 26: Install With Gang Box (Small Mounting Plate)

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-12 Apply Silicone Sealant on the Side 3.4 Install with Gang Box (Small Mounting Plate) Steps Note The additional force shall be equal to three times the weight of the equipment. The equipment ad its associated mounting means shall remain secure during the installation.
  • Page 27 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-13 Intall Gang Box 2. Use two supplied screws to secure the mounting plate on the gang box. Figure 3-14 Install Mounting Plate 3. Remove the two screws on the rear panel and remove the sheet to display the wiring terminals.
  • Page 28 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-15 Apply Silicone Sealant 7. Align the device with the mounting plate and hang the device on the mounting plate. Figure 3-16 Install Device 8. Use two supplied screws to secure the device and the mounting plate.
  • Page 29 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-17 Secure Device 9. Apply Silicone sealant among the joints between the device rear panel and the wall (except the lower side) to keep the raindrop from entering. Figure 3-18 Apply Silicone Sealant on the Side...

  • Page 30: Install Without Gang Box (Small Mounting Plate)

    DS-K1T341 Series Face Recognition Terminal User Manual 3.5 Install without Gang Box (Small Mounting Plate) Steps Note The additional force shall be equal to three times the weight of the equipment. The equipment ad its associated mounting means shall remain secure during the installation. After the installation, the equipment, including any associated mounting plate, shall not be damaged.
  • Page 31 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-20 Install Mounting Plate 4. Remove the two screws on the rear panel and remove the sheet to display the wiring terminals. 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables.
  • Page 32 DS-K1T341 Series Face Recognition Terminal User Manual 8. Align the device with the mounting plate and hang the device on the mounting plate. Figure 3-22 Install Device 9. Use two supplied screws to secure the device and the mounting plate.
  • Page 33 DS-K1T341 Series Face Recognition Terminal User Manual Figure 3-24 Apply Silicone Sealant on the Side...

  • Page 34: Chapter 4 Wiring

    DS-K1T341 Series Face Recognition Terminal User Manual Chapter 4 Wiring The device supports connecting to the RS-485 terminal, the door lock, the exit button, the alarm output/input devices, the Wiegand card reader, the access controller, and the power supply. You can wire the peripherals according to the descriptions below.

  • Page 35: Wire Fire Module

    DS-K1T341 Series Face Recognition Terminal User Manual Group Function Color Name Description Group D Door Lock White/Purple Lock Wiring (NC) White/Yellow Common White/Red Lock Wiring (NO) Yellow/Green SENSOR Door Contact Black Ground Yellow/Gray BUTTON Exit Door Wiring Yellow/Black Ground 4.2 Wire Fire Module You can connect the terminal with the fire module.
  • Page 36 DS-K1T341 Series Face Recognition Terminal User Manual • The suggested external power supply for door lock is 12 V, 1 A. The suggested external power supply for the Wiegand card reader is 12 V, 1A. • If the interface for network connection is too large, you can use the supplied cable as shown below.
  • Page 37 DS-K1T341 Series Face Recognition Terminal User Manual Figure 4-4 Cable Diagram Wiring Diagram of Door Locked When Powering Off Figure 4-5 Device Wiring Note • You should set the face recognition terminal's Wiegand direction as Input to connect to a Wiegand card reader.

  • Page 38: Wire Normal Device

    DS-K1T341 Series Face Recognition Terminal User Manual 4.3 Wire Normal Device You can connect the terminal with normal peripherals. Figure 4-7 Device Wiring Note • You should set the face recognition terminal's Wiegand direction as Input to connect to a Wiegand card reader.
  • Page 39 DS-K1T341 Series Face Recognition Terminal User Manual Figure 4-9 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A.

  • Page 40: Chapter 5 Activation

    DS-K1T341 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.
  • Page 41 DS-K1T341 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 42: Activate Via Sadp

    • Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/en/ , and install the SADP according to the prompts. • The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 43: Activate Device Via Client Software

    DS-K1T341 Series Face Recognition Terminal User Manual 5.3 Activate Device via Client Software For some devices, you are required to create the password to activate them before they can be added to the software and work properly. Steps Note This function should be supported by the device.

  • Page 44: Chapter 6 Basic Operation

    DS-K1T341 Series Face Recognition Terminal User Manual Chapter 6 Basic Operation 6.1 Set Application Mode After activating the device, you should select an application mode for better device application. Steps 1. On the Welcome page, select Indoor or Others from the drop-down list.

  • Page 45: Login

    DS-K1T341 Series Face Recognition Terminal User Manual Note • You can also change the settings in System Settings. • If you install the device indoors near the window or the face recognition function is not working well, select Others. • If you do not configure the application mode and tap Next, the system will select Indoor by default.

  • Page 46: Login By Administrator

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-2 Home Page 6.2.2 Login by Administrator After you add the administrator for the device, only the administrator can login the device for device operation. Steps 1. Long tap on the initial page for 3 s to enter the admin login page.
  • Page 47 DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-3 Admin Login 2. Authenticate the administrator's face or card to enter the home page.

  • Page 48: Communication Settings

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-4 Home Page Note The device will be locked for 30 minutes after 5 failed face or card attempts. 3. Optional: Tap and you can enter the device activation password for login.

  • Page 49: Set Network Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual 6.3.1 Set Network Parameters You can set the device network parameters, including the IP address, the subnet mask, and the gateway. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page.

  • Page 50: Set Rs-485 Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual Note The device's IP address and the computer IP address should be in the same IP segment. 5. Tap to save the network parameters. 6.3.2 Set RS-485 Parameters The face recognition terminal can connect external access controller, secure door control unit or card reader via the RS-485 terminal.
  • Page 51 DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-6 Set RS-485 Parameters 3. Select an peripheral type according to your actual needs. Note • Controller represents the access controller, Unit represents the secure door control unit and Reader represents the card reader.

  • Page 52: Set Wiegand Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual Note If you change the external device, and after you save the device parameters, the device will reboot automatically. 6.3.3 Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page.

  • Page 53: User Management

    DS-K1T341 Series Face Recognition Terminal User Manual 3. Enable the Wiegand function. 4. Select a transmission direction. • Output: A face recognition terminal can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or Wiegand 34.

  • Page 54: Add Face Picture

    DS-K1T341 Series Face Recognition Terminal User Manual 6. Optional: Set the administrator's authentication type. Note For details about setting the authentication type, see Set Authentication Mode . 7. Enable the Administrator Permission function. Enable Administrator Permission The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission.
  • Page 55 DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-8 Add Face Picture 6. Position your face looking at the camera. Note • Make sure your face picture is in the face picture outline when adding the face picture. • Make sure the captured face picture is in good quality and is accurate.

  • Page 56: Add Card

    DS-K1T341 Series Face Recognition Terminal User Manual Note The maximum duration for adding a face picture is 15s. You can check the remaining time for adding a face picture on the left of the page. 9. Enable or disable the Administrator Permission function.

  • Page 57: Add Password

    DS-K1T341 Series Face Recognition Terminal User Manual Note • The card No. cannot be empty. • Up to 20 characters are allowed in the card No. • The card No. cannot be duplicated. 8. Optional: Enable the Duress Card function. The added card When the user authenticates by swiping this duress card, the device will upload an duress card event to the client software.

  • Page 58: Set Authentication Mode

    DS-K1T341 Series Face Recognition Terminal User Manual Note • Only numbers are allowed in the password. • Up to 8 characters are allowed in the password. 6. Enable or disable the Administrator Permission function. Enable Administrator Permission The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission.

  • Page 59: Import And Export Data

    DS-K1T341 Series Face Recognition Terminal User Manual Edit User On the User Management page, select a user from the user list to enter the Edit User page. Follow the steps in User Management to edit the user parameters. Tap to save the settings.
  • Page 60 DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-9 Transfer Page 2. On the Transfer page, tap Export Att. Data, Export User Data, Export Profile Photo. 3. Tap Yes on the pop-up page and the data will be exported from the device to the USB flash drive.

  • Page 61: Import Data

    DS-K1T341 Series Face Recognition Terminal User Manual 6.5.2 Import Data Steps 1. Plug a USB flash drive in the device. 2. On the Transfer page, tap Import User Data, Import Profile Photo. 3. Tap Yes on the pop-up window and the data will be imported from the USB flash drive to the device.

  • Page 62: Authenticate Via Multiple Credential

    DS-K1T341 Series Face Recognition Terminal User Manual Face Face forward at the camera and start authentication via face. Card Present the card on the card presenting area and start authentication via card. Note The card can be normal IC card, or encrypted card.

  • Page 63: Set Face Picture Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-10 Basic Parameters Table 6-1 Basic Parameters Parameter Description Community No. Set the device installed community No. Building No. Set the device installed building No. Unit No. Set the device installed Unit No.
  • Page 64 DS-K1T341 Series Face Recognition Terminal User Manual On the Home page, tap System (System Settings) to enter the System Settings page. Figure 6-11 Face Picture Parameters...
  • Page 65 DS-K1T341 Series Face Recognition Terminal User Manual Table 6-2 Face Picture Parameters Parameter Description 1:N Security Level Set the matching threshold when authenticating via 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate.

  • Page 66: Set Time

    DS-K1T341 Series Face Recognition Terminal User Manual Parameter Description ECO Mode (1:N) Set the matching threshold when authenticating via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. By default, the value is 84.

  • Page 67: Disable Attendance Mode Via Device

    DS-K1T341 Series Face Recognition Terminal User Manual Note The function should be used cooperatively with time and attendance function on the client software. 6.8.1 Disable Attendance Mode via Device Disable the attendance mode and the system will not display the attendance status on the initial page.
  • Page 68 DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-14 Auto Attendance Mode 3. Select an attendance status and set its schedule. 1) Select Check In, Check Out, Break Out, Break In, Overtime In, or Overtime Out as the attendance status.

  • Page 69: Set Manual Attendance Via Device

    DS-K1T341 Series Face Recognition Terminal User Manual Result When you authenticate on the initial page, the authentication will be marked as the configured attendance status according to the configured schedule. Example If set the Break Out Schedule as Monday 11:00, and Break In Schedule as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break.

  • Page 70: Set Manual And Auto Attendance Via Device

    DS-K1T341 Series Face Recognition Terminal User Manual 6.8.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured parameters. At the same time you can manually change the attendance status after the authentication.

  • Page 71: Set Access Control Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual 1) Select Check In, Check Out, Break Out, Break In, Overtime In, or Overtime Out as the attendance status. 2) Tap Schedule. 3) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 4) Tap the select date and set the selected attendance status's start time.
  • Page 72 DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-17 Access Control Parameters The available parameters descriptions are as follows: Table 6-3 Access Control Parameters Descriptions Parameter Description Terminal Auth. Mode (Terminal Select the face recognition terminal's authentication mode. You Authentication Mode)

  • Page 73: Maintenance

    DS-K1T341 Series Face Recognition Terminal User Manual Parameter Description Note • Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. • If you adopt multiple authentication modes, you should authenticate other methods before authenticating face.

  • Page 74: Data Management

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-18 Upgrade 6.10.2 Data Management On the Data Management page, you can delete user data, restore to factory settings, or restore to default settings. Tap Data (Data Management) to enter the Data Management page. Tap the button on the page to...
  • Page 75 DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-19 Data Management The available button descriptions are as follows: Table 6-4 Data Descriptions Parameters Description Delete User Data Delete all user data in the device. Restore to Factory Restore the system to the factory settings. The device will reboot after the setting.

  • Page 76: Log Query

    DS-K1T341 Series Face Recognition Terminal User Manual 6.10.3 Log Query You can search the authentication logs within a period of time by inputting employee ID, card No., or user name. Steps 1. On the Home page, tap Log (Log) to enter the Log page.

  • Page 77: View System Information

    DS-K1T341 Series Face Recognition Terminal User Manual Note You can select from Custom, Yesterday, This Week, Last Week, This Month, Last Month, or All. If you select Custom, you can customize the start time and the end time for search.
  • Page 78 DS-K1T341 Series Face Recognition Terminal User Manual Figure 6-21 Capacity View Device Information You can view the device information. Tap Info. (System Information) → Device to enter the Device page. Note Some device models do not support displaying the fingerprint information.

  • Page 79: Two-Way Audio

    DS-K1T341 Series Face Recognition Terminal User Manual Tap Info. (System Information) → QR Code to enter the QR code page. And you can view the device QR code. 6.12 Two-Way Audio After adding the device to the client software, you can call the device from the client software, call the master station from the device, call the client software from the device, or call the indoor station from the device.

  • Page 80: Call Device From Client Software

    DS-K1T341 Series Face Recognition Terminal User Manual Note For details about adding device, see Add Device. 5. Set the master station's IP address and SIP address in the remote configuration page. Note For details about the operation, see the user manual of the master station.
  • Page 81 DS-K1T341 Series Face Recognition Terminal User Manual Note For details about adding device, see Add Device. 5. Link a user to an indoor station and set a room No. for the indoor station. 6. Tap on the authentication page of the device.

  • Page 82: Chapter 7 Client Software Configuration

    DS-K1T341 Series Face Recognition Terminal User Manual Chapter 7 Client Software Configuration 7.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 7-1 Flow Diagram of Configuration on Client Software 7.2 Device Management You can manage devices on the client, including adding, editing, and deleting the devices.
  • Page 83 DS-K1T341 Series Face Recognition Terminal User Manual Add Online Device The active online devices in the same local subnet with the client software will be displayed on the Online Device area. Note • You can click Refresh per 60s to refresh the information of the online devices.
  • Page 84 DS-K1T341 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 85 DS-K1T341 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 86 DS-K1T341 Series Face Recognition Terminal User Manual Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 87 DS-K1T341 Series Face Recognition Terminal User Manual Delete Device Select one or multiple devices and click Delete to delete the selected device(s) from the client. Add Devices by IP Segment If the devices share the same port No., user name and password, and their IP addresses are sharing an IP segment.
  • Page 88 DS-K1T341 Series Face Recognition Terminal User Manual Note • This function should be supported by the device. • You can log into the device to get the certificate file by web browser. 7. Check Synchronize Time to synchronize the device time with the PC running the client after adding the device to the client.
  • Page 89 DS-K1T341 Series Face Recognition Terminal User Manual 2. Click Add to open the Add window. 3. Select EHome as the adding mode. 4. Enter the required information. Device Account Enter the account name registered on EHome protocol. EHome Key For EHome 5.0 devices, enter the EHome key if you have set it when configuring network center parameter for the device.
  • Page 90 DS-K1T341 Series Face Recognition Terminal User Manual 2. Click Add to open the adding device window. 3. Select Batch Import as the adding mode. 4. Click Export Template and then save the pre-defined template (CSV file) on your PC. 5. Open the exported template file and enter the required information of the devices to be added on the corresponding column.

  • Page 91: Reset Device Password

    DS-K1T341 Series Face Recognition Terminal User Manual 7.2.2 Reset Device Password If you forgot the password of the detected online devices, you can reset the device password through the client. Steps 1. Enter Device Management page. 2. Click Online Device to show the online device area.

  • Page 92: Import Resources To Group

    DS-K1T341 Series Face Recognition Terminal User Manual 7.3.2 Import Resources to Group You can import the device resources to the added group in a batch. Before You Start Add a group for managing devices. Refer to Add Group . Steps 1.

  • Page 93: Person Management

    DS-K1T341 Series Face Recognition Terminal User Manual 7.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc. You can manage the added persons such as issuing cards to them in a batch, importing and exporting person information in a batch, etc.

  • Page 94: Issue A Card To One Person

    DS-K1T341 Series Face Recognition Terminal User Manual 3. Click Add to open the adding person window. The Person ID will be generated automatically. 4. Enter the basic information including person name, gender, tel, email address, etc. 5. Optional: Set the effective period of the person. Once expired, the credentials and access control settings of the person will be invalid and the person will have no authorization to access the doors\floors.

  • Page 95: Upload A Face Photo From Local Pc

    DS-K1T341 Series Face Recognition Terminal User Manual Duress Card When the person is under duress, he/she can swipe the duress card to open the door. The door will be unlocked and the client will receive a duress event to notify the security personnel.

  • Page 96: Take A Photo Via Client

    DS-K1T341 Series Face Recognition Terminal User Manual 7.4.5 Take a Photo via Client When adding person, you can take a photo of the person by the webcam of the PC running the client and set this photo as the person's profile.

  • Page 97: Configure Access Control Information

    DS-K1T341 Series Face Recognition Terminal User Manual 3. Click Add Face in the Basic Information panel. 4. Select Remote Collection. 5. Select an access control device which supports face recognition function from the drop-down list. 6. Collect face. 1) Face to the camera of the selected access control device and make sure your face is in the middle of the collecting window.

  • Page 98: Customize Person Information

    DS-K1T341 Series Face Recognition Terminal User Manual 7.4.8 Customize Person Information You can customize the person properties which are not pre-defined in the client according to actual needs, e.g., place of birth. After customizing, when add a person, you can enter the custom information to make the person information complete.

  • Page 99: Configure Additional Information

    DS-K1T341 Series Face Recognition Terminal User Manual 5. Confirm to add the person. - Click Add to add the person and close the Add Person window. - Click Add and New to add the person and continue to add other persons.

  • Page 100: Import Person Pictures

    DS-K1T341 Series Face Recognition Terminal User Manual Note • If the person has multiple cards, separate the card No. with semicolon. • Items with asterisk are required. • By default, the Hire Date is the current date. 7. Click to select the CSV file with person information.

  • Page 101: Export Person Information

    DS-K1T341 Series Face Recognition Terminal User Manual 7.4.14 Export Person Information You can export the added persons' information to local PC as a CSV file. Before You Start Make sure you have added persons to an organization. Steps 1. Enter the Person module.

  • Page 102: Move Persons To Another Organization

    DS-K1T341 Series Face Recognition Terminal User Manual Steps Note • If the person name stored in the device is empty, the person name will be filled with the issued card No. after importing to the client. • The gender of the persons will be Male by default.

  • Page 103: Report Card Loss

    DS-K1T341 Series Face Recognition Terminal User Manual 4. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing cards. 5. Click the card number column and enter the card number. - Place the card on the card enrollment station.

  • Page 104: Configure Schedule And Template

    DS-K1T341 Series Face Recognition Terminal User Manual Card Enrollment Station Select the model of the connected card enrollment station Note Currently, the supported card enrollment station models include DS-K1F100-D8, DS-K1F100-M, DS-K1F100-D8E, and DS-K1F180-D8E. Card Type This field is only available when the model is DS-K1F100-D8E or DS-K1F180-D8E.

  • Page 105: Add Template

    DS-K1T341 Series Face Recognition Terminal User Manual Steps Note You can add up to 64 holidays in the software system. 1. Click Access Control → Schedule → Holiday to enter the Holiday page. 2. Click Add on the left panel.
  • Page 106 DS-K1T341 Series Face Recognition Terminal User Manual 1. Click Access Control → Schedule → Template to enter the Template page. Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted. All-Day Authorized The access authorization is valid in each day of the week and it has no holiday.

  • Page 107: Set Access Group To Assign Access Authorization To Persons

    DS-K1T341 Series Face Recognition Terminal User Manual 7.6 Set Access Group to Assign Access Authorization to Persons After adding the person and configuring the person's credentials, you can create the access groups to define which person(s) can get access to which door(s) and then apply the access group to the access control device to take effect.

  • Page 108: Configure Advanced Functions

    DS-K1T341 Series Face Recognition Terminal User Manual The selected persons in the applied access groups will have the authorization to enter/exit the selected doors/door stations with their linked card(s) or fingerprints. 9. Optional: Click to edit the access group if necessary.
  • Page 109 DS-K1T341 Series Face Recognition Terminal User Manual Upload the pictures captured by linked camera to the system automatically. Save Pic. After Linked Capture If you enable this function, you can save the picture captured by linked camera to the device.
  • Page 110 DS-K1T341 Series Face Recognition Terminal User Manual Extended Open Duration The door contact can be enabled with appropriate delay after person with extended accesss needs swipes her/his card. Door Left Open Timeout Alarm The alarm can be triggered if the door has not been closed in a configured time period. If it is set as 0, no alarm will be triggered.
  • Page 111 DS-K1T341 Series Face Recognition Terminal User Manual Basic Information Name Edit the card reader name as desired. Minimum Card Swiping Interval If the interval between card swiping of the same card is less than the set value, the card swiping is invalid. You can set it as 0 to 255.

  • Page 112: Configure Remaining Open/Closed

    DS-K1T341 Series Face Recognition Terminal User Manual Set the matching threshold when authenticating via 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate when authentication. Application Mode You can select indoor or others application modes according to actual environment.

  • Page 113: Configure Multi-Factor Authentication

    DS-K1T341 Series Face Recognition Terminal User Manual • Move the cursor to the time duration and drag the time duration on the timeline bar to the desired position when the cursor turns to • Click the time duration and directly edit the start/end time in the appeared dialog.
  • Page 114 DS-K1T341 Series Face Recognition Terminal User Manual Before You Start Set access group and apply the access group to the access control device. For details, refer to Set Access Group to Assign Access Authorization to Persons . Perform this task when you want to set authentications for multiple cards of one access control point (door).

  • Page 115: Configure Custom Wiegand Rule

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 7-2 Remotely Open Door Note You can check Offline Authentication to enable the super password authentication when the access control device is disconnected with the client. Local Authentication and Super Password Authentication by the access control device and by the super password.
  • Page 116 DS-K1T341 Series Face Recognition Terminal User Manual Before You Start Wire the third party card readers to the device. Steps Note • By default, the device disables the custom wiegand function. If the device enables the custom Wiegand function, all wiegand interfaces in the device will use the customized wiegand protocol.

  • Page 117: Configure Card Reader Authentication Mode And Schedule

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 7-3 Set Output Transformation Rule 2) Select rules on the left list. The selected rules will be added to the right list. 3) Optional: Drag the rules to change the rule order.
  • Page 118 DS-K1T341 Series Face Recognition Terminal User Manual Figure 7-4 Select Card Reader Authentication Mode Note PIN refers to the PIN code set to open the door. Refer to Configure Access Control Information . 2) Check the modes in the Available Mode list and they will be added to the selected modes list.

  • Page 119: Configure First Person In

    DS-K1T341 Series Face Recognition Terminal User Manual Figure 7-5 Set Authentication Modes for Card Readers 6. Optional: Select a configured day and click Copy to Week to copy the same settings to the whole week. 7. Optional: Click Copy to to copy the settings to other card readers.

  • Page 120: Configure Anti-Passback

    DS-K1T341 Series Face Recognition Terminal User Manual Note The remain open duration should be between 0 and 1440 minutes. By default, the remain open duration is 10 minutes. Disable Remaining Open after First Person Disable the function of first person in, namely normal authentication.

  • Page 121: Configure Device Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual 6. Click OK in the dialog to save the selections. 7. Click Save at the upper-right corner of Anti-Passback page to save the settings and take effect. Note Super credentials, such as super card, super password, super fingerprint, and so on, have the privilege of not following the anti-passback rules.
  • Page 122 DS-K1T341 Series Face Recognition Terminal User Manual Set Network Parameters After adding the access control device, you can set the device log uploading mode, and create EHome account via wired network. Set Log Uploading Mode You can set the mode for the device to upload logs via EHome protocol.
  • Page 123 DS-K1T341 Series Face Recognition Terminal User Manual 5. Select the Address Type as IP Address or Domain Name. 6. Enter IP address or domain name according to the address type. 7. Enter the port number for the protocol. Note The port number of the wireless network and wired network should be consistent with the port number of EHome.
  • Page 124 DS-K1T341 Series Face Recognition Terminal User Manual 5. Set the capture times once triggered which defines how many pictures will be captures for one time. 6. If the capture times is more than 1, set the interval for each capture.
  • Page 125 DS-K1T341 Series Face Recognition Terminal User Manual Note These parameters displayed vary according to different device models. Algorithm Select Deep Learning as the face picture database. Save Authenticating Face Picture If enabled, the captured face picture when authenticating will be saved on the device.
  • Page 126 DS-K1T341 Series Face Recognition Terminal User Manual Set RS-485 Parameters You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode.

  • Page 127: Configure Linkage Actions For Access Control

    DS-K1T341 Series Face Recognition Terminal User Manual 7. Click Save. • The configured parameters will be applied to the device automatically. • After changing the communication direction, the device will reboot automatically. 7.8 Configure Linkage Actions for Access Control You can configure different linkage actions for the event detected by the access control device.

  • Page 128: Configure Device Actions For Access Event

    DS-K1T341 Series Face Recognition Terminal User Manual Note For setting the alarm sound, please refer to Set Alarm Sound in the user manual of client software.. Send Email Send an email notification of the alarm information to one or more receivers.

  • Page 129: Configure Device Actions For Card Swiping

    DS-K1T341 Series Face Recognition Terminal User Manual 8. Optional: After adding the device linkage, you can do one or more of the following: Edit Linkage Select the configured linkage settings in the device list and you can edit Settings its event source parameters, including event source and linkage target.

  • Page 130: Configure Device Actions For Person Id

    DS-K1T341 Series Face Recognition Terminal User Manual 7.8.4 Configure Device Actions for Person ID You can set the access control device's linkage actions for the specified person ID. When access control device detects the specified person ID, it can trigger buzzer on card reader, and other actions.

  • Page 131: Door Control

    DS-K1T341 Series Face Recognition Terminal User Manual 7.9 Door Control In Monitoring module, you can view the real-time status of the doors managed by the added access control device. You can also control the doors such as open/close the door, or remain the door open/closed via the client remotely.

  • Page 132: Check Real-Time Access Records

    DS-K1T341 Series Face Recognition Terminal User Manual Capture Capture a picture manually. Note The Capture button is available when the device supports capture function. The picture is saved in the PC running the client. For setting the saving path, refer to Set File Saving Path in the user manual of the client software.

  • Page 133: Enable Receiving Events From Devices

    DS-K1T341 Series Face Recognition Terminal User Manual In the event management page, you can configure access control event. For details about access control event configuration, refer to Configure Linkage Actions for Access Control . In the event center, you can view the real-time events and search the historical events. For details, refer to View Real-Time Events and Search Historical Events .
  • Page 134 DS-K1T341 Series Face Recognition Terminal User Manual Steps 1. Click Event Center → Real-time Event to enter the real-time event page and you can view the real-time events received by the client. Event Time For video device, event time is the client time when it receives the event. For none-video device, event time is the time when the event is triggered.
  • Page 135 DS-K1T341 Series Face Recognition Terminal User Manual Figure 7-8 Customize Event Related Items to be Displayed 4. View the event information details. 1) Select an event in the event list. 2) Click Expand in the right-lower corner of the page.

  • Page 136: Search Historical Events

    DS-K1T341 Series Face Recognition Terminal User Manual Note You should configure the email parameters first, see Set Email Parameters in the user manual of client software for details. 7.10.3 Search Historical Events In the Event Search module of the event center page, you can search the historical events via time, device type, and other conditions according to the specified device type, and then process the events.
  • Page 137 DS-K1T341 Series Face Recognition Terminal User Manual All the device types, and you can set the following filter conditions: group, priority, and status. Video Intercom For the events of video intercom, you need to select searching scope: All Record and Only Unlocking.
  • Page 138 DS-K1T341 Series Face Recognition Terminal User Manual Figure 7-10 Customize Event Related Items to be Displayed 5. Optional: Handle the event(s). - Handle single event: Select one event that need to be processed, and then click Handle in the event information details page, and enter the processing suggestion.

  • Page 139: Time And Attendance

    DS-K1T341 Series Face Recognition Terminal User Manual 7.11 Time and Attendance The Time and Attendance module provides multiple functionalities to track and monitor when employees start and stop work, and full control of employees working hours such as late arrivals, early departures, time taken on breaks and absenteeism.
  • Page 140 DS-K1T341 Series Face Recognition Terminal User Manual Overtime Level for Workday When you work for certain period after end-work time on workday, you will reach different overtime level: overtime level 1, overtime level 2 and overtime level 3 . You can set different pay rate for three overtime levels, respectively.
  • Page 141 DS-K1T341 Series Face Recognition Terminal User Manual Add Regular Holiday You can configure a holiday which will take effect annually on regular days during the effective period, such as New Year's Day, Independence Day, Christmas Day, etc. Steps 1. Enter the Time & Attendance module.
  • Page 142 DS-K1T341 Series Face Recognition Terminal User Manual The added holiday will display in the holiday list and calendar. If the date is selected as different holidays, it will be recorded as the first-added holiday. 11. Optional: After adding the holiday, perform one of the following operations.
  • Page 143 DS-K1T341 Series Face Recognition Terminal User Manual 5. Set table parameters of database according to the actual configurations. 1) Enter the table name of the third-party database. 2) Set the mapped table fields between the client software and the third-party database.

  • Page 144: Add Timetable

    DS-K1T341 Series Face Recognition Terminal User Manual Note If you select Must Check as calculation method, you need to set attendance status for late or early returning from break. 5. Click Save to save the settings. 6. Optional: Click Add to continue adding break time.
  • Page 145 DS-K1T341 Series Face Recognition Terminal User Manual Figure 7-11 Add Timetable 3. Create a name for the timetable. Note You can click the color icon beside the name to customize the color for the valid timetable on the time bar on the bottom of the page。...
  • Page 146 DS-K1T341 Series Face Recognition Terminal User Manual Each check-in time and check-out time is valid and the sum of all periods between adjacent check-in and check-out time will be recorded as the valid working duration. You need to set Valid Auth. Interval for this calculation method. For example, if the interval between card swiping of the same card is less than the set value, the card swiping is invalid.

  • Page 147: Add Shift

    DS-K1T341 Series Face Recognition Terminal User Manual Delete Timetable Select a timetable from the list and click Delete to delete it. 7.11.3 Add Shift You can add the shift for the shift schedule. Before You Start Add a timetable first. See Add Timetable for details.

  • Page 148: Manage Shift Schedule

    DS-K1T341 Series Face Recognition Terminal User Manual 3) Set the effective period for the shift schedule. 4) Set other parameters for the schedule. Check-in Not Required Persons in this schedule do not need to check-in when they come to work.
  • Page 149 DS-K1T341 Series Face Recognition Terminal User Manual Note After checking Multiple Shift Schedules, you can select the effective time period(s) from the added time periods for the persons in the department. Multiple Shift Schedules It contains more than one time periods. The person can check in/out in any of the time periods and the attendance will be effective.
  • Page 150 DS-K1T341 Series Face Recognition Terminal User Manual 5. Check the checkbox to enable Multiple Shift Schedules. Note After checking the Multiple Shift Schedules, you can select the effective timetable(s) from the added timetables for the persons. Multiple Shift Schedules It contains more than one timetables. The person can check in/out in any of the timetables and the attendance will be effective.

  • Page 151: Manually Correct Check-In/Out Record

    DS-K1T341 Series Face Recognition Terminal User Manual 4. Click one date or click and drag to select multiple dates for the temporary schedule. 5. Select Workday or Non-Workday from drop-down list. If Non-Workday is selected, you need to set the following parameters.

  • Page 152: Add Leave And Business Trip

    DS-K1T341 Series Face Recognition Terminal User Manual Before You Start • You should add organizations and persons in Person module. For details, refer to Person Management . • The person's attendance status is incorrect. Steps 1. Click Time & Attendance → Attendance Handling to enter attendance handling page.

  • Page 153: Calculate Attendance Data

    DS-K1T341 Series Face Recognition Terminal User Manual Before You Start You should add organizations and persons in the Person module. For details, refer to Person Management . Steps 1. Click Time & Attendance → Attendance Handling to enter attendance handling page.
  • Page 154 DS-K1T341 Series Face Recognition Terminal User Manual Automatically Calculate Attendance Data You can set a schedule so that the client can calculate the attendance data automatically at the time you configured every day. Steps Note It will calculate the attendance data till the previous day.

  • Page 155: Attendance Statistics

    DS-K1T341 Series Face Recognition Terminal User Manual 7.11.8 Attendance Statistics You can check the original attendance record, generate and export the attendance report based on the calculated attendance data. Get Original Attendance Record You can search the employee's attendance time, attendance status, check point, etc. in a time period to get an original record of the employees.
  • Page 156 DS-K1T341 Series Face Recognition Terminal User Manual Before You Start Calculate the attendance data. Note You can calculate the attendance data manually, or set the schedule so that the client can calculate the data automatically every day. For details, refer to Calculate Attendance Data .

  • Page 157: Remote Configuration (Web)

    DS-K1T341 Series Face Recognition Terminal User Manual 2) Set the effective period during which the client will send the report on the selected sending date(s). 3) Select the date(s) on which the client will send the report. 4) Set the time at which the client will send the report.

  • Page 158: Change Device Password

    DS-K1T341 Series Face Recognition Terminal User Manual 7.12.2 Change Device Password You can change the device password. Before You Start Make sure the device is activated. For details, see Activation. Steps 1. On the Device for Management page, click → System → User to enter the User tab.

  • Page 159: System Maintenance

    DS-K1T341 Series Face Recognition Terminal User Manual After you enable Manual Time Synchronization, you can manually set the device time. If you check Synchronize with Computer Time, the Set Time will display the current computer's time. At this time, uncheck Synchronize with Computer Time, and click , you can edit the device time manually.

  • Page 160: Configure Rs-485 Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual Note The configuration file contains the device parameters. Export Configuration File Export the configuration file from the device to the local PC. Note The configuration file contains the device parameters. Upgrade On the Device for Management page, click Remote Configuration → System → System Maintenance to enter the System Maintenance tab.

  • Page 161: Security Mode Settings

    DS-K1T341 Series Face Recognition Terminal User Manual 7.12.6 Security Mode Settings Set the security mode for logging in the client software. On the Device for Management page, click → System → Security to enter the Security Mode tab. Select a security mode from the drop-down list, and click Save.

  • Page 162: Network Center Parameters Settings

    DS-K1T341 Series Face Recognition Terminal User Manual Main Channel The device will communicate with the center via the main channel. Note N1 refers to wired network. 7.12.9 Network Center Parameters Settings You can set the notify surveillance center, center's IP address, the port No., the protocol (EHome), the EHome account user name,etc.

  • Page 163: Set Face Recognition Terminal Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual If you enable this function, the voice prompt is enabled in the device. You can hear the voice prompt when operating in the device. Upload Pictures after Capturing If you enable this function, the captured pictures will be sent to the client software.

  • Page 164: Configure Face Picture Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual 7.12.13 Configure Face Picture Parameters Steps 1. Click Maintenance and Management → Device to enter the device list. 2. Click to enter the remote configuration page. 3. Click Other → Face Picture Parameters to enter the Configuring Face Picture Parameters page.

  • Page 165: Configure Supplement Light Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual 7.12.14 Configure Supplement Light Parameters You can turn on or off the supplement light. You can also adjust the supplement light brightness. Steps 1. Click Maintenance and Management → Device to enter the device list.

  • Page 166: Remote Configuration Via Client Software

    DS-K1T341 Series Face Recognition Terminal User Manual 7.13 Remote Configuration via Client Software Configure device parameters remotely. 7.13.1 Check Device Information Steps 1. Click Maintenance and Management → Device to enter the device list. 2. Press CTRL and click to enter the remote configuration page.

  • Page 167: Manage User

    DS-K1T341 Series Face Recognition Terminal User Manual Reboot The device starts rebooting. Restore Default Settings Restore the device settings to the default ones, excluding the IP address. Restore All Restore the device parameters to the default ones. The device should be activated after restoring.

  • Page 168: Set Security

    DS-K1T341 Series Face Recognition Terminal User Manual 4. Click Add to add the user (Do not support by the elevator controller.). 5. Optional: Select a user in the user list and click Edit to edit the user. You are able to edit the user password, the IP address, the MAC address and the user permission.

  • Page 169: Configure Face Picture Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual Click Maintenance and Management → Device to enter the device list. Press CTRL and click to enter the remote configuration page. Click Network → Linked Network Configuration and set the master station's IP address and SIP server's IP address.

  • Page 170: Configure Supplement Light Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual The actual distance percentage should be larger than the configured value when face picture authentication. Other percentages, distances, and angles should also meet their conditions. Margin (Right) The distance percentage from the face right side to the right margin in the recognition area.

  • Page 171: Configure Video And Audio Parameters

    DS-K1T341 Series Face Recognition Terminal User Manual 5. Select a supplement light mode from the drop-down list. 6. Optional: If the supplement light mode is Auto, you can set the supplement light brightness. 7. Click Save to save the settings.
  • Page 172 DS-K1T341 Series Face Recognition Terminal User Manual 2. Press CTRL and click to enter the remote configuration page. 3. Click Image → Volume Input/Output to enter the Configuring the Volume Input or Output page. 4. Set the device input volume or output volume.

  • Page 173: Appendix A. Tips For Scanning Fingerprint

    DS-K1T341 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 174 DS-K1T341 Series Face Recognition Terminal User Manual Others If your fingerprint is shallow, or it is hard to scan your fingerprint, we recommend you to use other authentication methods. If you have injuries on the scanned finger, the scanner may not recognize. You can change another...

  • Page 175: Appendix B. Tips When Collecting/Comparing Face Picture

    DS-K1T341 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression • Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below.
  • Page 176 DS-K1T341 Series Face Recognition Terminal User Manual...

  • Page 177: Appendix C. Tips For Installation Environment

    DS-K1T341 Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Install the device at least 2 meters away from the light, and at least 3 meters away from the window or door.

  • Page 178: Appendix D. Dimension

    DS-K1T341 Series Face Recognition Terminal User Manual Appendix D. Dimension...

  • Page 179: Appendix E. Communication Matrix And Device Command

    Figure E-1 QR Code of Communication Matrix Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices.
  • Page 180 DS-K1T341 Series Face Recognition Terminal User Manual Figure E-2 Device Command...
  • Page 181 UD17388B...

This manual is also suitable for:

Ds-k1t341m

Table of Contents