Expression Pedal; Assigning A Parameter - DigiTech VOCAL 300 User Manual

Expression Pedal

Assigning a Parameter

The Vocal 300 includes a built-in Expression pedal. The Expression pedal is
used to control many of the Vocal 300's effect parameters in real time. To
assign a parameter to the Expression pedal, do the following:
1. Select a User or Factory Preset.
2. Press the SELECT button until the Matrix's last effect row LED begins
flashing.
3. Rotate the LOW knob to select the Expression pedal 1,2, or 3.
Note: You can assign three parameters to the Expression pedal per
preset.
4. Rotate the MIDRANGE knob to select the parameter the pedal will
control.
5. Rotate the HIGH knob to adjust the minimum value the pedal (toe up)
reaches.
6. Rotate the MASTER LEVEL knob to adjust the maximum value the pedal
(toe down) reaches.
7. Press the STORE button to store the changes. See page 5 for more
information on storing presets.
The following is a list of the parameters that can be assigned to the
Expression pedal:
Parameter
Voice Param 1
Voice Param 2
Voice Level
Effect Speed
Effect Amount
Effect Level
Effect Mix
Whammy
Delay Feedback
Delay In Level
Delay Out Level
Reverb Decay
Reverb In Level
Reverb Out Level
Volume Pre
Volume Post
6
Display Min Value
Varies Varies
Varies Varies
1
1
1
0
0
1
1
0
0
1
0
0
------
------
Max Value
Varies
Varies
99
99
99
99
99
99
99 R-hold
99
99
99
99
99
------
------