Noise Gate; Mod.effects - DigiTech VOCAL 300 User Manual

Character
Grunge
Dark Side
Monster
Chipmunk
Lunar
Lo-Fi
Robot
Wizard
Alien
Telephone
EQ
The EQ module is a 3-band EQ consisting of Bass, Mid and Treble. The frequency
centers for each band may vary depending on the selected model.
Bass – Rotate the LOW knob to adjust the low frequency gain.
Midrange - Rotate the MIDRANGE knob to adjust the midrange frequency gain.
Mid Frequency - Rotate the HIGH knob to adjust the midrange frequency.
High - Rotate the MASTER LEVEL knob to adjust the high frequency gain.

Noise Gate

The noise gate eliminates unwanted noise when a signal isn't present.
Gate On/Off - Rotate the LOW knob to turn the noise gate on and off.
Threshold - Rotate the MIDRANGE knob to select the noise gate's threshold.
A higher setting requires a stronger signal to open the gate.

Mod.Effects

The Mod Effects module has several effects to choose from: Off, Chorus, Flanger,
Phaser,Tremolo,Vibrato, Strobe, Doubler, Envelope, Pixelator, Detune, Pitch, and
Whammy. When the Mod. Effects row is selected, the following settings apply:
Type/Off - Rotate the LOW knob to select an effect and turn the effect on and
off.
Parameter 1 - Rotate the MIDRANGE knob to adjust the first parameter of
Parameter 2 - Rotate the HIGH knob to adjust the second parameter of the
Mod Level - Rotate the MASTER LEVEL knob to control the effect's level.
Note: Only one of the effects in this row can be used at a time.
Param 1
Gain
Breath
Size
Size
Range
Gain
Range
Range
Rate
Sub Frequency
the selected effect type (see the parameter list following these
instructions).
selected effect type (see the parameter list following these
instructions).
Display Param 2
De-Esser
n/a
Growl
n/a
n/a
Sub Frequency
Edge
n/a
Intensity
Sibilance
Display
9