Mod Parameters; Delay; Reverb - DigiTech VOCAL 300 User Manual

Mod Parameters

Effect
Chorus
Flanger
Phaser
Tremolo
Vibrato
Strobe
Doubler
Envelope
Pixelator
Detune
Pitch
Whammy

Delay

Delay records a portion of the incoming signal, and plays it back a short time later.
The recording can repeat just once or several times. The Delay module has three
types of delay effects: Digital, Analog, and Ping Pong.
Type /Off - Rotate the LOW knob to select the delay type and to turn the delay
Delay Time - Rotate the MIDRANGE knob to select the delay time.
Feedback - Rotate the HIGH knob to select the number of delay repeats and
Delay Level - Rotate the MASTER LEVEL knob to adjust the delay effect level.

Reverb

Using reverb in recorded program material gives the listener a sense that the
material is being performed in an actual room or hall. This similarity to actual
acoustic space makes reverberation a useful tool in recorded music.
Type/Off - Rotate the LOW knob to select 1 of 8 reverb types and to turn the
reverb on and off.
Decay - Rotate the MIDRANGE knob to adjust the reverb decay time.
Damping - Rotate the HIGH knob to adjust the amount of high frequency
Reverb Level - Rotate the MASTER LEVEL knob to adjust the effect's input
10
Parameter 1
Speed
Speed
Speed
Speed
Speed
Speed
n/a
Range
Amount
Amount
Amount
Amount
on and off.
the repeat hold.
damping in the reverb signal.
level.
Parameter 2
Depth
Depth
Depth
Depth
Depth
Depth
n/a
Sensitivity
Speed
n/a
n/a
Whammy Amount
Mod Level
wet level
wet/dry mix
wet/dry mix
n/a
n/a
n/a
wet level
wet/dry mix
wet/dry mix
wet level
wet/dry mix
wet/dry mix