V-Switch/Pedal Calibration; Factory Reset - DigiTech VOCAL 300 User Manual

V-Switch/Pedal Calibration

The Vocal 300 has an expression pedal feature called V-Switch. V-Switch is a
pressure sensitive virtual switch, that turns the Vocal Character module off and
on. The expression pedal must be calibrated for the Vocal Character module
to work. The expression pedal will continue to control the parameter it is
assigned to regardless of the Vocal Character status. However, it is important
to calibrate the expression pedal for it to function properly. To calibrate the
expression pedal, do the following:
1. Press the DOWN footswitch and connect the power.
displays, and then
2. Press the expression pedal forward (toe down).
3. Press a footswitch, and
4. Press the expression pedal toe up.
5. Press a footswitch, and
6.To calibrate the V-Switch press down hard on the toe until
the display. The sensitivity value appears in the numeric display. The display
toggles between
7. (Optional)Rotate the Master Level knob to adjust the V-Switch sensitivity.
8. Press any footswitch to return to Performance mode with the changes
saved.

Factory Reset

This function resets the Vocal 300 to its original factory status. This procedure
erases all custom user presets, and requires the expression pedal be recalibrated.
To complete a factory reset, do the following:
1. Disconnect the power supply from the Vocal 300.
2. Press and hold the SELECT button while connecting the power supply.
3.When
is displayed and the and Vocal 300 is reset.
4. Calibrate the expression pedal (see previous section).
is displayed.
On and
displays, release the button and press the STORE button. reset
appears in the display.
appears in the display.
Of.
briefly
appears in
7