DigiTech RP200 User Manual page 9

1. Footswitches - These 2 Footswitches are used to select Presets, access the Tuner, or bypass
the RP200.The Footswitch on the right will increase, and the Footswitch on
the left will decrease the selected Preset. Pressing both Footswitches together
will bypass the currently selected Preset. Pressing and holding both
Footswitches will access the Tuner.
2. Parameter Knobs - The Parameter knobs perform various functions depending on which
3. Select Button - This button is used to enter the Edit mode, and to select individual effects to
be edited. Successive presses of this button will advance through all available
Effects.
4. Rhythm - The Rhythm button is used to turn on and off the Rhythm Trainer drum loop.When
the Rhythm feature is active, the Rhythm LED lights and the selected drum pattern
plays continuously.
5. Matrix - The matrix provides information regarding the current Preset, and Parameter edit
functions. In performance mode, the LEDs running down the left side of the Matrix
will provide a visual indication of which effects are in use for the currently selected
Preset. In Edit mode, the LEDs indicate the Effect currently selected for editing. In
Tuner mode, the LEDs indicate whether the note played is sharp, flat, or in tune.
mode is currently active in the RP200. In performance mode, these knobs
control the Amp Type, Gain, and Master Level. In Edit mode, these knobs
adjust the Parameter values listed directly above each knob for the
selected effect. In Rhythm Trainer, these knobs control the Pattern,Tempo,
and Level. In Tuner mode, these knobs are used to select the desired
tuning reference.
3