Amp Modeling - DigiTech RP200 User Manual

Amount - The Parameter 2 knob adjusts the Amount of Compression (ratio and sustain) and
ranges from 1 (slight compression) through 20 (maximum sustain).
Gain - The Parameter 3 knob adjusts the Output Gain from the Compressor. Ranges from 0
to 6.

Amp Modeling

Amp Modeling is a technology which applies the tone of several popular modern and vintage
amps. Amp Modeling also includes an acoustic guitar simulation.
Amp Type - The Parameter 1 knob selects the 12 types of Amp Models.
amp Of - Turns the modeling off
BLKFAC - Based on a '65 Fender Twin Reverb
BOUTIQ - Based on a Matchless DC30
RECTIF - Based on a Mesa Dual Rectifier
HOTROD - Based on a Mesa Boogie Mark II C
tweeD - Based on a '57 Fender Tweed Deluxe
CLEAN1 - Based on a Vox AC30 top boost
Marshall® is a registered trademark of Marshall Amplification Plc. Vox® is a registered trademark of Korg UK. Fender,
Matchless, and Mesa Boogie, are trademarks of their respective companies and are in no way associated with DigiTech.
Amp Gain - The Parameter 2 knob adjusts the Gain (distortion) for the selected Amp Model
(not available for Acoustic).The Gain parameter ranges from 0 to 99.
Amp Level - The Parameter 3 knob adjusts the Level (volume) of the selected Amp Model.
The Level parameter ranges from 0 to 99.
CLEAN2 - A clean tube combo setting
STACK - Based on a Marshall JCM900
CRUNCH - A nice crunchy combo
HIGAIN - Based on the Johnson JM150 High Gain
FUZZ - A vintage fuzz distortion
ACOUST - A flat top acoustic guitar
17