Storing/Copying Presets - DigiTech Element Owner's Manual

Storing/Copying Presets

The STORE button is used to save modifications made to a preset's settings. The STORE button's
LED will light whenever effect settings have been changed from their stored value, indicating the
changes must be stored to memory to be retained. Preset setting changes must always be stored
to a user preset memory location, since factory presets cannot be overwritten. The Element and
Element XP have 100 user preset memory locations. Factory presets can be accessed at any time,
used as a starting point, edited, then stored to a user preset location. You can also copy a user or
factory preset to any of the available 100 user preset locations.
To quickly store a preset to its current memory location (quick update):
Make the desired edits to the preset's effect settings. See "Editing Effects" on page 16.
1.
Press the
2.
STORE
the preset is being stored. This will store the newly changed effect settings to the currently
loaded preset memory location.
NOTE: If you perform the above quick update procedure on a factory preset, the changes will be
stored to the equivalent user preset memory location. For example, if you load factory preset 5 (
make edits, and then press the
use caution when performing this procedure on factory presets to ensure you do not accidentally
overwrite one of your existing user presets.
To store an edited preset to a different memory location:
Make the desired edits to the preset's effects. See "Editing Effects" on page 16.
1.
Press the
2.
STORE
display.
Use the
3.
SELECT
store the user preset (indicated in the display).
Press the
4.
STORE
in the LED display, indicating the preset is being stored.
NOTE: Pressing one of the
the above procedure will abort the store procedure.
button twice. will be briefly displayed in the LED display, indicating
Sd
button twice, you will overwrite user preset 5 (
STORE
button once. The current preset number will begin flashing in the LED
knob to select the user preset memory location at which you would like to
button again to complete the store procedure.
FOOTSWITCHES
or any button (other than the
). Therefore,
5
will be briefly displayed
Sd
button) during
DRUMS
),
f 5
17