Jam-A-Long; Learn-A-Lick Mode; Using Learn-A-Lick - DigiTech GNX1 User Manual

S O - I
ECTION NE

Jam-A-Long

The Jam-A-Long feature allows you to connect a Tape, CD, or MP3 player to the GNX1, and Jam with your favorite
artists.The signal from your Tape, CD, or MP3 player is output through the left and right, and headphone outputs of the
GNX1. To use the Jam-A-Long feature, connect the headphone output of your Tape, CD, or MP3 player to the Jam-A-
Long Input on the rear panel of the GNX1 using an 1/8" stereo cable.Then press play on your Tape, CD, or MP3 play-
er.

Learn-A-Lick Mode

The Learn-A-Lick function allows you to record a 9 second passage of music and play it back as slow as 1/4 speed with
no change in pitch. This is very useful for picking out the notes of a fast guitar solo.
There are 6 functions for Learn-A-Lick.They are:
• Stop (Controlled by the number 1 Footswitch)
• Play (Controlled by the number 1 Footswitch)
• Tempo Down (Controlled with Data Down button)

Using Learn-A-Lick

1. Connect the output of your Tape, CD, or MP3 player's headphone output to the Jam-A-Long input jack on the rear
panel using an 1/8" stereo plug. Set the level of the player to a desired listening level.
2. Cue up to the passage you want to record and hit pause on the Tape, CD, or MP3 player.
3. Press and hold the number 2 and 3 Footswitches to enter Learn-A-Lick mode.The display will read: LALICK.
4. Release the pause button on your playback device and press the number 3 (Record) Footswitch. The display
will read: RECORD and recording will begin. The red numeric Display will provide a time elapsed reference while
recording is in process.When recording is completed, the phrase will be set to an auto-loop playback mode indi-
cated by play in the Display.
5. Press stop or pause on the playback device.
6. Press the Data Down button to slow the playback down. Press the Data Up button to increase the playback
speed to normal at 1/8 speed intervals.Your interval choices include: FULL, 7/8, 3/4, 5/8, 1/2, 3/8, and 1/4
speeds.
7. Pressing the number 2 (Rewind) Footswitch steps back through the loop at 1 second intervals.
8. The Expression Pedal will control output level of the recorded phrase.
9. To stop the playback, press the number 1 (Stop) Footswitch.
10.To resume playback, press the number 1 Footswitch again.
11. To record a new passage, press the number 3 (Record) Footswitch.
12. To exit the Learn-A-Lick mode, press and hold the number 2 and 3 Footswitches, or press the Exit button.
10
NTRODUCTION
• Rewind (Controlled by the number 2 Footswitch)
• Record (Controlled by the number 3 Footswitch)
• Tempo Up (Controlled by the Data Up button)