Section Four - Other Functions; Drum Machine; Jam-A-Long; Expression Pedal - DigiTech RP200A User Manual

Section Four - Other Functions

Drum Machine

The RP200 Artist includes several sampled drum patterns which are useful for developing a good
sense of timing. Pressing the Drums button will enable the drum machine and start playback of
the selected drum pattern (except when in Store or Bypass mode). When Drums is active, the
Parameter 1 knob selects the drum Pattern, the Parameter 2 knob adjusts the drum Tempo,
and the Parameter 3 knob adjusts the Level of the drum pattern. Press the Drums button
again to stop playback of the drum loop.

Jam-A-Long

The Jam-A-Long feature allows you to connect a Tape or CD to the RP200 Artist, and Jam with
your favorite artists.The signal from your tape or CD player is output through the left, right, and
headphone outputs of the RP200 Artist. To use the Jam-A-Long feature, connect the headphone
output of your tape or CD player to the Jam-A-Long Input on the rear panel of the RP200
Artist using an 1/8" stereo cable, and press play on your tape or CD player.

Expression Pedal

The Expression Pedal on the RP200 Artist can be assigned to control the RP200 Artist's Volume,
Wah, Whammy™,Ya Ya™, or one of several other parameters in real time with your foot.
When a parameter has been assigned to the Expression Pedal, a programmable minimum and
maximum value can also be assigned.The procedure for assigning a parameter to the Expression
Pedal is as follows:
1. Press the Select button until the Expression row has been selected (indicated by the LED
lighting on the Expression row).
2. Rotate the Parameter 1 knob until the desired Parameter appears in the Display.Your
choices include:
27