dji RS 2 Manual

1. Product 2. Port
Focus Motor Port
With two M4 screw holes,
A
the Focus Motor Port allows
the DJI Ronin Focus Motor to
be fixed to the stabilizer.
B
Tilt Motor
B
B Mount the DJI R Roll Axis
Counterweight Set here to
A C adjust the roll axis.
Tilt Axis Arm
The DJI R Vertical Camera
C Mount can replace the camera
mounting plate on the tilt axis
arm to enable vertical
shooting in portrait mode.
C
D
Cold Shoe
A mechanical cold shoe that
can mount the DJI Ronin
D
RavenEye Image Transmis
sion System and third-party
accessories that have a cold
E
shoe foot.
RSA / NATO Port
Used to mount the DJI R Twist
Grip Dual Handle and other
H compatible accessories, as well
E
D
as communicate with 8-pin
interface accessories. DJI also
provides SDK for third-party
accessories to control the
stabilizer via this port.
1/4''-20 Screw Hole
Used to mount the DJI R
F
Extended Grip/Tripod and
third-party tripods or monopods
with the same port.
E
F
Electronic Ports
1. To connect camera shutter
port and start/stop recording;
G 2. To mount the focus motor and
control focus externally;
3. To power on and communicate
with the DJI Ronin RavenEye
Image Transmission System.
Power Port
Dedicated port for DJI RS 2. Can
H
connect to a standard battery
grip or to an external battery via
the DJI Ronin Expansion Base Kit.
3. Accessories 2. 4. Installation
1
2
3
1. Product 2. Port
Focus Motor Port
With two M4 screw holes,
A
the Focus Motor Port allows
the DJI Ronin Focus Motor to
be fixed to the stabilizer.
F
B
Tilt Motor
B Mount the DJI R Roll Axis
Counterweight Set here to
A
adjust the roll axis.
Cold Shoe
A mechanical cold shoe that
can mount the DJI Ronin
C
C
RavenEye Image
Transmission
System and third-party
accessories that have a cold
shoe foot.
NATO Port
Standard mechanical port to
mount accessories such as the DJI
D R Briefcase Handle, DJI R Twist
Grip Dual Handle, and DJI R Phone
Holder, as well as third-party
accessories using the NATO
standard
D
E
1/4''-20 Screw Hole
E Used to mount the DJI R
Extended Grip/Tripod and
third-party tripods or monopods
with the same port.
Electronic Port
1. To connect camera shutter port
and start/stop recording;
F
2. To mount the focus motor and
1 2
control focus externally;
3. To power on and communicate
with the DJI Ronin RavenEye Image
Transmission System
3. Accessories 4. Installation
3