Storing/Naming Defaults - DigiTech 2112 Owner's Manual

S /N
TORING AMING
Before we get into editing Modules and creating your Defaults, let's learn how to store changes so you won't lose any
modifications you'll want to keep.The Store procedure allows you to rename, relocate and save any modifications you
have made to Defaults so that they can be accessed easily later.
• When you have satisfactorily altered an Effect Default (or created a new one), scroll back to Page 1 of the effect
Module you are editing (if you're not already there).The display looks something like this:
• From Page 1 of the FX Edit Menu, turn the <3> Knob clockwise.You will then be able to name your new default.
N D
AMING THE EFAULT
• Using the <Program/Effect> wheel, change the charac-
ter to the one you want in the selected position.
• When the correct character is displayed in that posi-
tion, use the <Page> knob to scroll the cursor to the
next character you want to change.
• Use the <1> to change the letter's case. Use the<2>
knob to select numbers. The <3> knob is used to
insert spaces.The <4> knob is used to copy and paste
characters.
• To copy a character, position the cursor under the char-
acter you want to copy (using the <Page> knob), then
turn the <4> knob clockwise. To paste the copied
character, position the cursor where you want to paste
the character, then turn the <4> Knob counter-clock-
wise.
• To abort the procedure, push either the <Program>
button to take you to Program Mode, the <Edit> but-
ton to take you to FX Edit Mode, or the <Utilities>
button to take you to Utility Mode, depending upon
which mode you want to enter.
D
EFAULTS
2
FX:[Name]
On
%kHz
1
msdB
LINK CHANGED
COMP WAH
FACTORY USER
SEAMLESS
BANK 1 5
PAGE OF
Custom
1 Sto ---
%kHz %kHz
2 3 4
msdB msdB
LINK CHANGED LINK CHANGED LINK CHANGED
TUBE EQ GATE
DIGITAL
CLIP
S D
TORING THE EFAULT
• When you have the name as you want it to read, press
<Store>.The top line of the display reads:
Store To: [Name]
This screen allows you to select the location of the new
Default. Note that when the Default is stored, it is stored
in the User bank of Defaults because Factory Defaults
cannot be overwritten.
• Use the <2> knob to select the Default number where
you want to store the new Default.
• Press <Store> again.The Default is saved off and you
are taken to page 1 of the FX Edit menu.
The newly created Default is now loaded, and can now
be recalled at any time.
• To abort the procedure, push either the <Program>
button to take you to Program Mode, the <Edit> but-
ton to take you to FX Edit Mode, or the <Utilities>
button to take you to Utility Mode, depending upon
which mode you want to enter.
%kHz
msdB
L/R OUTS
21