Module Types; Module Sizes - DigiTech 2112 Owner's Manual

M T
ODULE YPES
There are three basic types of FX Modules:
• Mono
• Dual
• Stereo
The figure below illustrates what the signals do as they enter the Module. Although all three Modules are shown with
stereo inputs, they can still be used with a mono source.The mono source would just be routed to both sides of the
module's inputs. Notice how the Dual FX Module maintains stereo compatibility while the mono FX Module always
sums the signals together.
Mono FX Module
Effect
Processing
M S
ODULE IZES
In order to achieve the nearly endless combinations of effects and routings, we've supplied you with four different

module sizes:

• Whole (module type = FUL )
• 3/4 (module type = 3-4 )
• Half (module type = HLF )
• Quarter (module type = 4th )
Dividing each S-DISC II's processing power is what allows your 2112 to handle up to 15 effects at one time.
The figure below represents how each S-DISC II can be divided to accommodate a wide variety of effect routing.
S-DISC II (A)
S-DISC II (B)
A Whole module type offers effects with more flexibility and power than the Half modules, and so on, but all four
sizes of FX Modules feature very high quality effects, so you don't have to worry if you need to divide the S-DISC II
pie four ways.
For a complete list of these FX Types please see Editing Modules. For a complete list of effect configurations please
see Appendix on page 64.
10
Dual FX Module
Effect
Processing
Stereo FX Module
Effect
Processing