Advertisement
Quick Links
Kobra 2 Plus Firmware Upgrade Guide
1. Tips:
1.Please make sure to follow the
"Guide"
and do not skip any steps.
In the main interface, click on the "Tools" icon , "Control" icon ,
2.After Update the firmware.
"Module Calibration" , "Position Calibration." The machine will automatically perform
detection and pause near the top the calibration module. You could adjust the nozzle to the
center position of the calibration module using the distance units and X/Y axis movement
direction on the interface. Once done, click "Save," and finally, perform the automatic
leveling again.
Advertisement
Related Manuals for AnyCubic Kobra 2 Plus
Summary of Contents for AnyCubic Kobra 2 Plus
- Page 1 Kobra 2 Plus Firmware Upgrade Guide 1. Tips: 1.Please make sure to follow the "Guide" and do not skip any steps. In the main interface, click on the "Tools" icon , "Control" icon , 2.After Update the firmware. "Module Calibration" , "Position Calibration." The machine will automatically perform detection and pause near the top the calibration module.
-
Page 2: Upgrade Steps
2. Upgrade Steps: 1.Connect to Wi-Fi: Plug in the device and turn it on. On the main interface, click on the "Settings" icon, then "Cloud," "WLAN," and activate the "WLAN" option. The device will automatically search for nearby 2.4GHz Wi- Fi signals. - Page 3 2.Upgrade Firmware: For readability, the images in the following illustration show all the available options, which may differ from the actual device interface. Please follow the prompts below:...
- Page 4 Click on the top-left corner " < " icon to return to the Settings interface.Click "More Settings," "About Machine," and the red arrow icon. The device will prompt you to confirm the upgrade. After confirming, the firmware upgrade will automatically complete within 3 minute.
- Page 5 3.Device Calibration: After the firmware upgrade is complete, the device will automatically restart. Once the device restarts, it will prompt you to go through the setup process again. Please do not skip this setup. Follow the on-screen instructions carefully. If you do not receive a prompt, follow these steps: On the main screen, click on "Settings."Click on "More Settings."In the next screen, click on "Guide."It will be asked if you want to enter the user guide;...
- Page 6 4.Version Confirmation: Go to "Settings," "More Settings," "About Machine," and check if the firmware version has been successfully updated.
-
Page 8: Troubleshooting
3. Troubleshooting 4. Additional Issues: If you encounter any problems during the upgrade, we recommend that you create a support ticket. The after-sales engineers will assist you in finding a solution to the problem(Reply time :1 working day) Please click this link to submit your ticket: After-sales Ticket Submission Page...
Need help?
Do you have a question about the Kobra 2 Plus and is the answer not in the manual?
Questions and answers