HP 245161-B22 - 10642 42U Rack Shock Pallet Best Practices Manual page 41

Place the four corner posts on each corner of the rack. Make sure that the corner posts are
9.
properly positioned around the door handles to prevent damage.
NOTE
It is helpful to tape or stretch-wrap the corner posts in place.
NOTE
The thicker corner pad covers the hinged corner of 10000 G2 Series
Racks.
Figure 28. Placing the four corner posts
Place the ramp box against the sidewall of the rack between the corner posts on either side of the
10.
rack. Then, stretch-wrap the corner posts and the box containing the ramp assembly to the rack.
Figure 29. Placing the ramp box against the sidewall
39