Calibrate the touch screen. See
2.
Waking the Mobile Computer
The wakeup conditions define what actions wake up the mobile computer after it has gone into suspend mode. The
mobile computer can go into suspend mode by either pressing the Power button or automatically by Control Panel
time-out settings. These settings are configurable and the factory default settings are shown in
Table 2-10
Wakeup Default Settings
Condition for Wakeup
AC power is applied.
Mobile computer is inserted into a cradle.
Mobile computer is removed from a cradle.
Mobile computer is connected to a serial device.
Mobile computer is connected to a USB device.
Mobile computer is disconnected from a USB device.
A key is pressed.
The scan triggered is pressed.
The screen is touched.
Wireless LAN activity is detected.
File System Directory Structure
The mobile computer directory structure displays all of the file folders. The pre-installed folders are in flash file
system memory and optional removable storage devices (SD storage cards).
Figure 2-24
Mobile Computer Directory Structure
• Application and Platform folders are located in flash file system memory.
Calibration Screen on page 1-10
Power Button
No
No
No
No
No
No
No
No
No
No
Operating the MC3000 2 - 29
to calibrate the mobile computer screen.
Table
Automatic Time-out
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
2-10.