Beeper
Display
Scan LED
Indicator
(red/green)
Trigger
MC3090G Mobile Computer
Figure 1-4
Mobile Computer Startup
To start using the mobile computer:
• Install the main battery.
• Charge the main battery and the backup battery.
• Start the mobile computer.
Install Main Battery
If the main battery is charged, the mobile computer can be used immediately. If the main battery is not charged,
see Battery Charging on page 1-7. To remove the main battery, see Main Battery Removal on page 1-11.
To install the main battery:
Rotate the latches to the open position.
1.
CAUTION
Do not lift up on the latches when removing the Strap/Door Assembly. Lift up on the Hand Strap only.
Pull on the strap to lift the Strap/Door Assembly off, bottom first.
2.
Scan LED
Charge LED
Indicators
Indicator
(red/green)
(amber)
Getting Started
Indicator LED Bar
Scan Button
Keypad
Power
1 - 5