Download Print this page

Larson Electronics EPL-WPLED-100W-RT-PSC-DNS Instruction Manual

100w explosion proof led wall pack light w/ glare shield surface mount- 11,667l - c1d1 - photocell

Advertisement

Quick Links

100W Explosion Proof LED Wall Pack Light w/ Glare Shield
This explosion proof light is designed for illumination of industrial locations. It uses the latest in
solid state lighting technology for long life, low maintenance and high efficiency.
The unique design focuses the light where it is needed, giving improved efficiency over a
conventional HID luminaire.
WARNING
To avoid the risk of fire, explosion or electric shock, this product should be installed, inspected
and maintained by a qualified electrician only, in accordance with all applicable electrical codes.
To avoid electric shock:
Be certain electrical power is OFF before and during installation and maintenance.
Luminaire must be connected to a wiring system with an equipment-grounding conductor.
To avoid explosion:
Make sure the supply voltage is within the luminaires' voltage rating.
Ensure the marked T rating is less than the ignition temperature of the Hazardous
Atmosphere.
Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.
For supply connections, use wire rated for at least 110°C
Recommended mounting height is 25-40 feet.
MOUNTING
This fixture offers an adjustable surface mounting system that allows this fixture to be mounted to any
flat surface including walls and ceilings. A single ½-13 bolt is used to mount the fixture to the
surface.
1. Using bolts, washers and nuts provided, attach brackets "A" to both sides of
bracket "B".
2. The LED fixture has 9 holes for a versatile mount option. Select the holes that you would like
to use.
3. Brackets "A" will then be bolted to the LED fixture with the remaining bolts and washers.
4. The fixture is now ready for installation.
Larson Electronics, LLC
Surface Mount- 11,667L - C1D1 - Photocell
Instruction Manual
Phone: (800) 369-6671
Fax: (903) 498-3364
EPL-WPLED-100W-RT-PSC-DNS
www.larsonelectronics.com
1 of 3

Advertisement

loading
Need help?

Need help?

Do you have a question about the EPL-WPLED-100W-RT-PSC-DNS and is the answer not in the manual?

Questions and answers

Summary of Contents for Larson Electronics EPL-WPLED-100W-RT-PSC-DNS

  • Page 1 2. The LED fixture has 9 holes for a versatile mount option. Select the holes that you would like to use. 3. Brackets “A” will then be bolted to the LED fixture with the remaining bolts and washers. 4. The fixture is now ready for installation. Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 2 EPL-WPLED-100W-RT-PSC-DNS See Images Below as a Reference BRACKET B BRACKETS A BRACKET B BRACKETS A Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com 2 of 3...
  • Page 3 6. Mechanically check that all parts are properly assembled. THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT SALES@LARSONELECTRONICS.COM OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.