Larson Electronics EPL-20W-HID-X12V-347V-GR50 Instruction Manual
  1. Manuals
  2. Brands
  3. Larson Electronics Manuals
  4. Lighting Equipment
  5. EPL-20W-HID-X12V-347V-GR50
  6. Instruction manual

Larson Electronics EPL-20W-HID-X12V-347V-GR50 Instruction Manual

20w hid explosion proof search light c1d1 & c2d1 - 347v ac stepped down to 12v dc - 50' soow
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C1D1 & C2D1 - 347V AC Stepped Down to 12V DC - 50' SOOW
Thank you for your purchase of the Larson Electronics EPL-20W-HID-X12V-347V-GR50.
)
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
•
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF FIXTURE'S ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE FIXTURE'S RATED VOLTAGE.
•
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
•
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE EPL-20W-HID-X12V-347V-GR50 MUST BE WIRED IN ACCORDANCE WITH NATIONAL
ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING: MAKE SURE POWER IS TURNED OFF BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
RISK OF FIRE/ELECTRIC SHOCK –
RISK OF PERSONAL INJURY –
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
WARNING:
USER SHOULD BE TRAINED IN THE PROPER USE AND MAINTENANCE OF THIS DEVICE.
CORD IS INTENDED TO ALLOW OPERATORS TO EXTEND POWER TO EQUIPMENT WHEN STATIONARY OUTLETS ARE NOT
READILY AVAILABLE.
IMPROPER USE OF THIS CORD, PLUG, AND RECEPTACLE CAN LEAD TO SERIOUS INJURIES OR DEATH TO
PERSONNEL.
PERIODIC INSPECTION OF THE CORD IS NECESSARY.
THE CORD MUST BE ROUTINELY CHECKED FOR CUTS, BREAKS, OR ANY SEVERE ABRASIONS, AND IF ANY ARE FOUND,
THE CORD MUST BE REPLACED BEFORE RESUMING USE.
Larson Electronics, LLC
20W HID Explosion Proof Search Light
Instruction Manual
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
Phone: (800) 369-6671
Fax: (903) 498-3364
EPL-20W-HID-X12V-347V-GR50
www.larsonelectronics.com
THIS LINE
1 of 9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EPL-20W-HID-X12V-347V-GR50 and is the answer not in the manual?

Questions and answers

Related Manuals for Larson Electronics EPL-20W-HID-X12V-347V-GR50

Summary of Contents for Larson Electronics EPL-20W-HID-X12V-347V-GR50

  • Page 1 20W HID Explosion Proof Search Light C1D1 & C2D1 - 347V AC Stepped Down to 12V DC - 50' SOOW Instruction Manual Thank you for your purchase of the Larson Electronics EPL-20W-HID-X12V-347V-GR50. WARNING: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2 BE REPLACED BEFORE RESUMING USE OF THE HANDLAMP. THE GLOBE IS MADE OF TEMPERED GLASS. IF THIS GLASS BECOMES SCRATCHED OR CHIPPED IT SHOULD BE REPLACED IMMEDIATELY. 2 of 9 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...
  • Page 3 Polycase that steps down the input voltage from 347V AC down to 12V DC. The EPL-20W-HID-X12V-347V-GR50 is designed to be hardwired and is safe to use within non- hazardous work areas.

  • Page 4: Installation

    Mount cord reel after successfully completing installation. 4. The light has a power switch and will illuminate once energized and toggled. If spotlight does not illuminate, check switch, and/or power source. 4 of 9 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...

  • Page 5: Operational Warnings

    The reel is mounted on the moving object and winds up or pays out the cable as the machine approaches or moves away from the fixed end. Retrieve applications can be elevated up to 4 feet from the cable support surface. 5 of 9 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...

  • Page 6: Standard Mounting

    Locate the dimple on the lock out bar in the hole provided. WARNING: Do not activate the ratchet abruptly. Sudden activation may cause excessive shock loads to the ratchet pawl which may cause lock-up and/or breakage. 6 of 9 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...

  • Page 7: Cable Installation

    4. Keep two wraps of cable on the reel at maximum extension to avoid excessive tension on the cable and to prevent pullout of cable from entrance watertight. 7 of 9 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364...

  • Page 8: Lamp Maintenance

    2. Due to factory sealing of explosion proof unit, slip ring replacement should only be done by the factory. CABLE REPLACEMENT 1. Cable replacement should only be attempted by the factory. This is due to the cable being epoxy sealed into the entrance ring. 8 of 9 Larson Electronics, LLC Phone: (800) 369-6671 Fax: (903) 498-3364 www.larsonelectronics.com...

  • Page 9: Troubleshooting

    THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS. SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT SALES@LARSONELECTRONICS.COM OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.

Table of Contents