Advertisement
Quick Links
PDS-025 Projector Bracket Installation Instructions
PDS-025 Bracket
(Qty 1)
1. Invert the projector and place it on a soft and flat surface. Remove any foot
levelers that might possibly prevent the correct installation of the bracket.
2. Locate the four mounting points located on the bottom of the projector.
3. Line up the mounting points on the projector with the mounting holes on
the PDS-025 mounting bracket.
Installation Instructions
IN-PDS025.R0
M4 x 12mm Phillips
Head Screws
(Qty 4)
M4 x 12mm
Security Head
Screws (Qty 4)
1. Using a screwdriver, secure the PDS-025 mounting bracket using four (4)
M4 x 12mm Phillips Head screws. Do not over tighten these screws.
Overtightening the screws may result in damaging the threaded inserts on
the projector.
NOTE:
Please refer to the PDS Base Box Installation Instructions to attach
the PDS Base Box to the PDS-025 mounting bracket.
NOTE:
The projector (shown above) is for illustration purposes only.
PDS-025 Projector Bracket
Page 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Premier Mounts PDS-025
Summary of Contents for Premier Mounts PDS-025
- Page 1 Security Head Screws (Qty 4) 1. Using a screwdriver, secure the PDS-025 mounting bracket using four (4) M4 x 12mm Phillips Head screws. Do not over tighten these screws. 1. Invert the projector and place it on a soft and flat surface. Remove any foot Overtightening the screws may result in damaging the threaded inserts on levelers that might possibly prevent the correct installation of the bracket.
- Page 2 8. Follow the instructions in the PDS Manual to complete the installation. Mounting Bracket Security Screws 1. Using a security wrench (supplied), secure the PDS-025 mounting bracket using four (4) M4 x 12mm Security Head screws. Do not over tighten these screws. Overtightening the screws may result in damaging the threaded inserts on the projector.
Need help?
Do you have a question about the PDS-025 and is the answer not in the manual?
Questions and answers