Advertisement
Quick Links
PDS-008 Projector Bracket Installation Instructions
PDS-008 Bracket
(Qty 1)
1. Invert the projector and place it on a soft and flat surface. Remove any foot
levelers that might possibly prevent the correct installation of the bracket.
2. Locate the four mounting points located on the bottom of the projector.
3. Line up the mounting points on the projector with the mounting holes on
the PDS-008 mounting bracket.
Installation Instructions
IN-PDS008.R0
M4 x 10mm Phillips
Head Screws
(Qty 4)
M4 x 10mm
Security Head
Screws (Qty 4)
1. Using a screwdriver, secure the PDS-008 mounting bracket using four (4)
M4 x 10mm Phillips Head screws. Do not over tighten these screws.
Overtightening the screws may result in damaging the threaded inserts on
the projector.
NOTE:
Please refer to the PDS Base Box Installation Instructions to attach
the PDS Base Box to the PDS-008 mounting bracket.
NOTE:
The projector (shown above) is for illustration purposes only.
PDS-008 Projector Bracket
Page 1
Advertisement
Related Manuals for Premier Mounts PDS-008
Summary of Contents for Premier Mounts PDS-008
- Page 1 Security Head Screws (Qty 4) 1. Using a screwdriver, secure the PDS-008 mounting bracket using four (4) M4 x 10mm Phillips Head screws. Do not over tighten these screws. 1. Invert the projector and place it on a soft and flat surface. Remove any foot Overtightening the screws may result in damaging the threaded inserts on levelers that might possibly prevent the correct installation of the bracket.
- Page 2 8. Follow the instructions in the PDS Manual to complete the installation. Mounting Bracket Security Screws 1. Using a security wrench (supplied), secure the PDS-008 mounting bracket using four (4) M4 x 10mm Security Head screws. Do not over tighten these screws. Overtightening the screws may result in damaging the threaded inserts on the projector.
Need help?
Do you have a question about the PDS-008 and is the answer not in the manual?
Questions and answers