Related Manuals for Hyundai power products HPVD18L-50A-4
Summary of Contents for Hyundai power products HPVD18L-50A-4
- Page 1 CORDLESS DRILL HPVD18L-50A-4 WARNING: Read thoroughly the instruction manual before using.
-
Page 2: Table Of Contents
CONTENTS 1. APPLICATION............................4 2. DESCRIPTION............................4 3. PACKAGE CONTENT LIST.........................4 4. SYMBOLS............................... 4 5. GENERAL POWER TOOL SAFETY WARNINGS................5 6. DRILL SAFETY WARNINGS....................... 7 7. SCREWDRIVER SAFETY WARNINGS.....................7 8. ADDITIONAL SAFETY WARNINGS....................7 9. OPERATION............................10 10. CLEANING AND MAINTENANCE....................11 11. - Page 3 Fig. A...
-
Page 4: Application
1. APPLICATION The power tool is intended for driving and drilling through wood and plastics It is not designed for professional use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. -
Page 5: General Power Tool Safety Warnings
Do not put the battery in Do not put the battery on fire water 5. GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. - Page 6 to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
-
Page 7: Drill Safety Warnings
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery;... - Page 8 charger increases the risk of electric shock. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery may create a risk of fire when used with another battery. Do not charge other batteries. The battery charger is suitable only for charging our lithium ion batteries within the listed voltage range.
- Page 9 Before the use of the charger and the battery read the instruction manual carefully. During the charge process, the current used should correspond to the current of the battery charger. Never let moisture, rain or splashed water reaches the charging location.
-
Page 10: Operation
explosion! Protect the battery from impacts, and don't open it. Never discharge the battery completely and recharge occasionally if not used for a prolonged period WARNING: Do not recharge non-rechargeable batteries. 8.2 Residual risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design: ... -
Page 11: Cleaning And Maintenance
If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. 11. TECHNICAL DATA Model HPVD18L-50A-4 Rated voltage 18V d.c. , (20V max) No – load speed 0-650/min... -
Page 12: Noise
Max. torque 20 Nm Chuck type Keyless chuck Acoustic pressure level LpA 87.6 dB(A), K=5dB(A) Acoustic power level LwA 98.6dB(A), K=5dB(A) Vibration 1.298m/s² K =1,5 m/s² 12. NOISE Noise emission values measured according to relevant standard. ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A). Information: The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another;... -
Page 13: Declaration Of Conformity
ZI, 32 rue Aristide Bergès – 31270 Cugnaux – France Declares that the machinery designated below: Drill / Screwdriver HPVD18L-50A-4 S/N: 20240902841-20240903740 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration. -
Page 14: Warranty
17 . WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. It can be extended by one year if the user subscribes to website of myswap. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. -
Page 15: Product Failure
1 8 . PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. •... -
Page 16: Warranty Exclusions
1 9 . WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the HPVD18L-50A-4 and is the answer not in the manual?
Questions and answers