Related Manuals for Hyundai power products HPVD145-37A
Summary of Contents for Hyundai power products HPVD145-37A
- Page 1 CORDLESS DRILL HPVD145-37A HPVD185-37A-A HPVD18L-50A-1 ORIGINAL INSTRUCTIONS INSTRUCTION ORIGINAL INSTRUCTIONS...
- Page 2 Fig. A...
-
Page 3: Description (Fig A)
1. APPLICATION The power tool is intended for driving and drilling through wood and plastics It is not designed for professional use. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. -
Page 4: General Power Tool Safety Warnings
4. SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury In accordance with essential or damage to the tool. requirements of the European directive(s) Wear eye protection Wear gloves Read manual before use Max temperature Recycle Do not put the battery in water... - Page 5 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
-
Page 6: Additional Safety Warnings
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. e) Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. - Page 7 ▪ Check the battery charger, cable and plug each time before using. Do not use the battery charger when defects are detected. Do not open the battery charger yourself and have it repaired only by qualified personnel using original spare parts.
- Page 8 ▪During the charge process, the current used should correspond to the current of the battery charger. ▪Never let moisture, rain or splashed water reaches the charging location. ▪The ambient temperature must not exceed 40 °C. ▪Batteries which are defective or damaged or can no longer be recharged must be disposed as a hazardous waste.
- Page 9 ▪Do not throw batteries into water or fire, risk of explosion! ▪Protect the battery from impacts, and don't open it. ▪Never discharge the battery completely and recharge occasionally if not used for a prolonged period WARNING: recharge non-rechargeable batteries. 7.2 Residual risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
-
Page 10: Cleaning And Maintenance
If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. 10. TECHNICAL DATA Model nr. HPVD145-37A HPVD185-37A-A HPVD18L-50A-1 Rated voltage 16Vd.c. -
Page 11: Battery Pack
Max. drill capacity steel 0.8-10mm 0.8-10mm 0.8-10mm Charger time 1 hour 1 hour 3-5 hours Battery capacity 1500 mAh 1500 mAh 1300 mAh Battery type Li-ion Li-ion Li-ion Max. torque 28 Nm 35 Nm 20 Nm Chuck type Keyless chuck Keyless chuck Keyless chuck Acoustic pressure level... -
Page 12: Warranty
This product contains Li-ion. To preserve natural resources, please recycle or dispose of batteries properly. Local, state or federal laws may prohibit disposal of Li-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. 15. -
Page 13: Declaration Of Conformity
16. DECLARATION OF CONFORMITY BUILDER SAS ZI, 32 rue Aristide Bergès – 31270 Cugnaux – France Declares that the machinery designated below: Drill / Screwdriver HPVD18L-50A-1 S/N: 20200408885-20200410384 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards.
Need help?
Do you have a question about the HPVD145-37A and is the answer not in the manual?
Questions and answers